Atomic bomb scientist. H-bomb

Our article is devoted to the history of creation and general principles of synthesis of such a device, sometimes called hydrogen. Instead of releasing explosive energy by splitting the nuclei of heavy elements like uranium, it generates even more energy by fusing the nuclei of light elements (such as isotopes of hydrogen) into one heavy one (such as helium).

Why is nuclear fusion preferable?

During a thermonuclear reaction, which consists in the fusion of the nuclei of the chemical elements participating in it, significantly more energy is generated per unit mass of a physical device than in a pure atomic bomb that implements a nuclear fission reaction.

In an atomic bomb, fissile nuclear fuel quickly, under the influence of the energy of detonation of conventional explosives, combines in a small spherical volume, where its so-called critical mass is created, and the fission reaction begins. In this case, many neutrons released from fissile nuclei will cause the fission of other nuclei in the fuel mass, which also release additional neutrons, leading to a chain reaction. It covers no more than 20% of the fuel before the bomb explodes, or perhaps much less if conditions are not ideal: as in the atomic bombs Little Kid dropped on Hiroshima and Fat Man that hit Nagasaki, efficiency (if such a term can be applied to them) apply) were only 1.38% and 13%, respectively.

The fusion (or fusion) of nuclei covers the entire mass of the bomb charge and lasts as long as neutrons can find thermonuclear fuel that has not yet reacted. Therefore, the mass and explosive power of such a bomb are theoretically unlimited. Such a merger can theoretically continue indefinitely. Indeed, the thermonuclear bomb is one of the potential doomsday devices that could destroy all human life.

What is a nuclear fusion reaction?

The fuel for the thermonuclear fusion reaction is hydrogen isotopes deuterium or tritium. The first differs from ordinary hydrogen in that its nucleus, in addition to one proton, also contains a neutron, and the tritium nucleus already has two neutrons. In natural water, there is one deuterium atom for every 7,000 hydrogen atoms, but from its quantity. contained in a glass of water, as a result of a thermonuclear reaction, the same amount of heat can be obtained as from the combustion of 200 liters of gasoline. At a 1946 meeting with politicians, the father of the American hydrogen bomb, Edward Teller, emphasized that deuterium provides more energy per gram of weight than uranium or plutonium, but costs twenty cents per gram compared with several hundred dollars per gram of fission fuel. Tritium does not occur in nature in a free state at all, so it is much more expensive than deuterium, with a market price of tens of thousands of dollars per gram, but the greatest amount of energy is released precisely in the fusion reaction of deuterium and tritium nuclei, in which the nucleus of a helium atom is formed and released neutron carrying away excess energy of 17.59 MeV

D + T → 4 He + n + 17.59 MeV.

This reaction is shown schematically in the figure below.

Is it a lot or a little? As you know, everything is learned by comparison. So, the energy of 1 MeV is approximately 2.3 million times more than that released during the combustion of 1 kg of oil. Consequently, the fusion of only two nuclei of deuterium and tritium releases as much energy as is released during the combustion of 2.3∙10 6 ∙17.59 = 40.5∙10 6 kg of oil. But we are talking about only two atoms. You can imagine how high the stakes were in the second half of the 40s of the last century, when work began in the USA and the USSR, which resulted in a thermonuclear bomb.

How it all began

As early as the summer of 1942, at the beginning of the atomic bomb project in the United States (the Manhattan Project) and later in a similar Soviet program, long before a bomb based on the fission of uranium nuclei was built, the attention of some participants in these programs was drawn to the device, which can use a much more powerful nuclear fusion reaction. In the USA, a supporter of this approach, and even, one might say, its apologist, was the above-mentioned Edward Teller. In the USSR, this direction was developed by Andrei Sakharov, a future academician and dissident.

For Teller, his fascination with thermonuclear fusion during the years of creating the atomic bomb was rather a disservice. As a participant in the Manhattan Project, he persistently called for the redirection of funds to implement his own ideas, the goal of which was a hydrogen and thermonuclear bomb, which did not please the leadership and caused tension in relations. Since at that time the thermonuclear direction of research was not supported, after the creation of the atomic bomb Teller left the project and began teaching, as well as researching elementary particles.

However, the outbreak of the Cold War, and most of all the creation and successful testing of the Soviet atomic bomb in 1949, became a new chance for the ardent anti-communist Teller to realize his scientific ideas. He returns to the Los Alamos laboratory, where the atomic bomb was created, and, together with Stanislav Ulam and Cornelius Everett, begins calculations.

The principle of a thermonuclear bomb

In order for the nuclear fusion reaction to begin, the bomb charge must be instantly heated to a temperature of 50 million degrees. The thermonuclear bomb scheme proposed by Teller uses for this purpose the explosion of a small atomic bomb, which is located inside the hydrogen casing. It can be argued that there were three generations in the development of her project in the 40s of the last century:

Teller's variation, known as the "classic super";
more complex, but also more realistic designs of several concentric spheres;
the final version of the Teller-Ulam design, which is the basis of all thermonuclear weapon systems operating today.

The thermonuclear bombs of the USSR, whose creation was pioneered by Andrei Sakharov, went through similar design stages. He, apparently, completely independently and independently of the Americans (which cannot be said about the Soviet atomic bomb, created by the joint efforts of scientists and intelligence officers working in the USA) went through all of the above design stages.

The first two generations had the property that they had a succession of interlocking "layers", each of which reinforced some aspect of the previous one, and in some cases feedback was established. There was no clear division between the primary atomic bomb and the secondary thermonuclear one. In contrast, the Teller-Ulam thermonuclear bomb diagram sharply distinguishes between a primary explosion, a secondary explosion, and, if necessary, an additional one.

The device of a thermonuclear bomb according to the Teller-Ulam principle

Many of its details still remain classified, but it is reasonably certain that all thermonuclear weapons currently available are based on the device created by Edward Telleros and Stanislaw Ulam, in which an atomic bomb (i.e. the primary charge) is used to generate radiation, compresses and heats fusion fuel. Andrei Sakharov in the Soviet Union apparently independently came up with a similar concept, which he called the "third idea."

The structure of a thermonuclear bomb in this version is shown schematically in the figure below.

It was cylindrical in shape, with a roughly spherical primary atomic bomb at one end. The secondary thermonuclear charge in the first, not yet industrial samples, was made of liquid deuterium; somewhat later it became solid from a chemical compound called lithium deuteride.

The fact is that industry has long used lithium hydride LiH for balloon-free hydrogen transportation. The developers of the bomb (this idea was first used in the USSR) simply proposed taking its isotope deuterium instead of ordinary hydrogen and combining it with lithium, since it is much easier to make a bomb with a solid thermonuclear charge.

The shape of the secondary charge was a cylinder placed in a container with a lead (or uranium) shell. Between the charges there is a neutron protection shield. The space between the walls of the container with thermonuclear fuel and the bomb body is filled with special plastic, usually polystyrene foam. The bomb body itself is made of steel or aluminum.

These shapes have changed in recent designs such as the one shown below.

In it, the primary charge is flattened, like a watermelon or an American football ball, and the secondary charge is spherical. Such shapes fit much more efficiently into the internal volume of conical missile warheads.

Thermonuclear explosion sequence

When a primary atomic bomb detonates, in the first moments of this process a powerful X-ray radiation (neutron flux) is generated, which is partially blocked by the neutron shield, and is reflected from the inner lining of the housing surrounding the secondary charge, so that the X-rays fall symmetrically across its entire length

During the initial stages of a thermonuclear reaction, neutrons from an atomic explosion are absorbed by a plastic filler to prevent the fuel from heating up too quickly.

X-rays initially cause the appearance of a dense plastic foam that fills the space between the housing and the secondary charge, which quickly turns into a plasma state that heats and compresses the secondary charge.

In addition, the X-rays evaporate the surface of the container surrounding the secondary charge. The substance of the container, evaporating symmetrically relative to this charge, acquires a certain impulse directed from its axis, and the layers of the secondary charge, according to the law of conservation of momentum, receive an impulse directed towards the axis of the device. The principle here is the same as in a rocket, only if you imagine that the rocket fuel scatters symmetrically from its axis, and the body is compressed inward.

As a result of such compression of thermonuclear fuel, its volume decreases thousands of times, and the temperature reaches the level at which the nuclear fusion reaction begins. A thermonuclear bomb explodes. The reaction is accompanied by the formation of tritium nuclei, which merge with deuterium nuclei initially present in the secondary charge.

The first secondary charges were built around a rod core of plutonium, informally called a "candle", which entered into a nuclear fission reaction, i.e., another, additional atomic explosion was carried out in order to further raise the temperature to ensure the start of the nuclear fusion reaction. It is now believed that more efficient compression systems have eliminated the "candle", allowing further miniaturization of bomb design.

Operation Ivy

This was the name given to the tests of American thermonuclear weapons in the Marshall Islands in 1952, during which the first thermonuclear bomb was detonated. It was called Ivy Mike and was built according to the Teller-Ulam standard design. Its secondary thermonuclear charge was placed in a cylindrical container, which was a thermally insulated Dewar flask with thermonuclear fuel in the form of liquid deuterium, along the axis of which a “candle” of 239-plutonium ran. The dewar, in turn, was covered with a layer of 238-uranium weighing more than 5 metric tons, which evaporated during the explosion, providing symmetrical compression of the thermonuclear fuel. The container containing the primary and secondary charges was housed in a steel casing 80 inches wide by 244 inches long with walls 10 to 12 inches thick, the largest example of wrought iron up to that time. The inner surface of the case was lined with sheets of lead and polyethylene to reflect radiation after the explosion of the primary charge and create plasma that heats the secondary charge. The entire device weighed 82 tons. A view of the device shortly before the explosion is shown in the photo below.

The first test of a thermonuclear bomb took place on October 31, 1952. The power of the explosion was 10.4 megatons. Attol Eniwetok, where it was produced, was completely destroyed. The moment of the explosion is shown in the photo below.

The USSR gives a symmetrical answer

The US thermonuclear championship did not last long. On August 12, 1953, the first Soviet thermonuclear bomb RDS-6, developed under the leadership of Andrei Sakharov and Yuli Khariton, was tested at the Semipalatinsk test site. From the description above, it becomes clear that the Americans at Enewetok did not explode the bomb itself, as a type of ready-to-use ammunition, but rather a laboratory device, cumbersome and very imperfect. Soviet scientists, despite the small power of only 400 kg, tested a completely finished ammunition with thermonuclear fuel in the form of solid lithium deuteride, and not liquid deuterium, like the Americans. By the way, it should be noted that only the 6 Li isotope is used in lithium deuteride (this is due to the peculiarities of thermonuclear reactions), and in nature it is mixed with the 7 Li isotope. Therefore, special production facilities were built to separate lithium isotopes and select only 6 Li.

Reaching Power Limit

What followed was a decade of continuous arms race, during which the power of thermonuclear munitions continually increased. Finally, on October 30, 1961, in the USSR over the Novaya Zemlya test site in the air at an altitude of about 4 km, the most powerful thermonuclear bomb that had ever been built and tested, known in the West as the “Tsar Bomba,” was exploded.

This three-stage munition was actually developed as a 101.5-megaton bomb, but the desire to reduce radioactive contamination of the area forced the developers to abandon the third stage with a yield of 50 megatons and reduce the design yield of the device to 51.5 megatons. At the same time, the power of the explosion of the primary atomic charge was 1.5 megatons, and the second thermonuclear stage was supposed to give another 50. The actual power of the explosion was up to 58 megatons. The appearance of the bomb is shown in the photo below.

Its consequences were impressive. Despite the very significant height of the explosion of 4000 m, the incredibly bright fireball with its lower edge almost reached the Earth, and with its upper edge it rose to a height of more than 4.5 km. The pressure below the burst point was six times higher than the peak pressure of the Hiroshima explosion. The flash of light was so bright that it was visible at a distance of 1000 kilometers, despite the cloudy weather. One of the test participants saw a bright flash through dark glasses and felt the effects of the thermal pulse even at a distance of 270 km. A photo of the moment of the explosion is shown below.

It was shown that the power of a thermonuclear charge really has no limitations. After all, it was enough to complete the third stage, and the calculated power would be achieved. But it is possible to increase the number of stages further, since the weight of the Tsar Bomba was no more than 27 tons. The appearance of this device is shown in the photo below.

After these tests, it became clear to many politicians and military men both in the USSR and in the USA that the limit of the nuclear arms race had come and it needed to be stopped.

Modern Russia inherited the nuclear arsenal of the USSR. Today, Russia's thermonuclear bombs continue to serve as a deterrent to those seeking global hegemony. Let's hope they only play their role as a deterrent and never get blown up.

The sun as a fusion reactor

It is well known that the temperature of the Sun, or more precisely its core, reaching 15,000,000 °K, is maintained due to the continuous occurrence of thermonuclear reactions. However, everything that we could glean from the previous text speaks of the explosive nature of such processes. Then why doesn't the Sun explode like a thermonuclear bomb?

The fact is that with a huge share of hydrogen in the solar mass, which reaches 71%, the share of its isotope deuterium, the nuclei of which can only participate in the thermonuclear fusion reaction, is negligible. The fact is that deuterium nuclei themselves are formed as a result of the merger of two hydrogen nuclei, and not just a merger, but with the decay of one of the protons into a neutron, positron and neutrino (so-called beta decay), which is a rare event. In this case, the resulting deuterium nuclei are distributed fairly evenly throughout the volume of the solar core. Therefore, with its enormous size and mass, individual and rare centers of thermonuclear reactions of relatively low power are, as it were, smeared throughout its entire core of the Sun. The heat released during these reactions is clearly not enough to instantly burn out all the deuterium in the Sun, but it is enough to heat it to a temperature that ensures life on Earth.

The Germans were the first to get down to business. In December 1938, their physicists Otto Hahn and Fritz Strassmann were the first in the world to artificially split the nucleus of a uranium atom. In April 1939, the German military leadership received a letter from Hamburg University professors P. Harteck and W. Groth, which indicated the fundamental possibility of creating a new type of highly effective explosive. Scientists wrote: “The country that is the first to practically master the achievements of nuclear physics will acquire absolute superiority over others.” And now the Imperial Ministry of Science and Education is holding a meeting on the topic “On a self-propagating (that is, chain) nuclear reaction.” Among the participants is Professor E. Schumann, head of the research department of the Armament Directorate of the Third Reich. Without delay, we moved from words to deeds. Already in June 1939, construction of Germany's first reactor plant began at the Kummersdorf test site near Berlin. A law was passed banning the export of uranium outside Germany, and a large amount of uranium ore was urgently purchased from the Belgian Congo.

The American uranium bomb that destroyed Hiroshima had a cannon design. Soviet nuclear scientists, when creating the RDS-1, were guided by the “Nagasaki bomb” - Fat Boy, made of plutonium using an implosion design.

Germany starts and... loses

On September 26, 1939, when war was already raging in Europe, it was decided to classify all work related to the uranium problem and the implementation of the program, called the “Uranium Project”. The scientists involved in the project were initially very optimistic: they believed it was possible to create nuclear weapons within a year. They were wrong, as life has shown.

22 organizations were involved in the project, including such well-known scientific centers as the Institute of Physics of the Kaiser Wilhelm Society, the Institute of Physical Chemistry of the University of Hamburg, the Institute of Physics of the Higher Technical School in Berlin, the Institute of Physics and Chemistry of the University of Leipzig and many others. The project was personally supervised by the Reich Minister of Armaments Albert Speer. The IG Farbenindustry concern was entrusted with the production of uranium hexafluoride, from which it is possible to extract the uranium-235 isotope, capable of maintaining a chain reaction. The same company was also entrusted with the construction of an isotope separation plant. Such venerable scientists as Heisenberg, Weizsäcker, von Ardenne, Riehl, Pose, Nobel laureate Gustav Hertz and others directly participated in the work.

Over the course of two years, Heisenberg's group carried out the research necessary to create a nuclear reactor using uranium and heavy water. It was confirmed that only one of the isotopes, namely uranium-235, contained in very small concentrations in ordinary uranium ore, can serve as an explosive. The first problem was how to isolate it from there. The starting point of the bomb program was a nuclear reactor, which required graphite or heavy water as a reaction moderator. German physicists chose water, thereby creating a serious problem for themselves. After the occupation of Norway, the world's only heavy water production plant at that time passed into the hands of the Nazis. But there, at the beginning of the war, the supply of the product needed by physicists was only tens of kilograms, and even they did not go to the Germans - the French stole valuable products literally from under the noses of the Nazis. And in February 1943, British commandos sent to Norway, with the help of local resistance fighters, put the plant out of commission. The implementation of Germany's nuclear program was under threat. The misfortunes of the Germans did not end there: an experimental nuclear reactor exploded in Leipzig. The uranium project was supported by Hitler only as long as there was hope of obtaining super-powerful weapons before the end of the war he started. Heisenberg was invited by Speer and asked directly: “When can we expect the creation of a bomb capable of being suspended from a bomber?” The scientist was honest: “I believe it will take several years of hard work, in any case, the bomb will not be able to influence the outcome of the current war.” The German leadership rationally considered that there was no point in forcing events. Let the scientists work calmly - you'll see they'll be in time for the next war. As a result, Hitler decided to concentrate scientific, production and financial resources only on projects that would give the fastest return in the creation of new types of weapons. Government funding for the uranium project was curtailed. Nevertheless, the work of scientists continued.

Manfred von Ardenne, who developed a method for gas diffusion purification and separation of uranium isotopes in a centrifuge.

In 1944, Heisenberg received cast uranium plates for a large reactor plant, for which a special bunker was already being built in Berlin. The last experiment to achieve a chain reaction was scheduled for January 1945, but on January 31 all the equipment was hastily dismantled and sent from Berlin to the village of Haigerloch near the Swiss border, where it was deployed only at the end of February. The reactor contained 664 cubes of uranium with a total weight of 1525 kg, surrounded by a graphite moderator-neutron reflector weighing 10 tons. In March 1945, an additional 1.5 tons of heavy water was poured into the core. On March 23, Berlin was reported that the reactor was operational. But the joy was premature - the reactor did not reach the critical point, the chain reaction did not start. After recalculations, it turned out that the amount of uranium must be increased by at least 750 kg, proportionally increasing the mass of heavy water. But there were no more reserves of either one or the other. The end of the Third Reich was inexorably approaching. On April 23, American troops entered Haigerloch. The reactor was dismantled and transported to the USA.

Meanwhile overseas

In parallel with the Germans (with only a slight lag), the development of atomic weapons began in England and the USA. They began with a letter sent in September 1939 by Albert Einstein to US President Franklin Roosevelt. The initiators of the letter and the authors of most of the text were physicists-emigrants from Hungary Leo Szilard, Eugene Wigner and Edward Teller. The letter drew the president's attention to the fact that Nazi Germany was conducting active research, as a result of which it might soon acquire an atomic bomb.

In 1933, German communist Klaus Fuchs fled to England. Having received a degree in physics from the University of Bristol, he continued to work. In 1941, Fuchs reported his participation in atomic research to Soviet intelligence agent Jürgen Kuchinsky, who informed the Soviet ambassador Ivan Maisky. He instructed the military attaché to urgently establish contact with Fuchs, who was going to be transported to the United States as part of a group of scientists. Fuchs agreed to work for Soviet intelligence. Many Soviet illegal intelligence officers were involved in working with him: the Zarubins, Eitingon, Vasilevsky, Semenov and others. As a result of their active work, already in January 1945 the USSR had a description of the design of the first atomic bomb. At the same time, the Soviet station in the United States reported that the Americans would need at least one year, but no more than five years, to create a significant arsenal of atomic weapons. The report also said that the first two bombs could be detonated within a few months. Pictured is Operation Crossroads, a series of atomic bomb tests conducted by the United States at Bikini Atoll in the summer of 1946. The goal was to test the effect of atomic weapons on ships.

In the USSR, the first information about the work carried out by both the allies and the enemy was reported to Stalin by intelligence back in 1943. A decision was immediately made to launch similar work in the Union. Thus began the Soviet atomic project. Not only scientists received assignments, but also intelligence officers, for whom the extraction of nuclear secrets became a top priority.

The most valuable information about the work on the atomic bomb in the United States, obtained by intelligence, greatly helped the advancement of the Soviet nuclear project. The scientists participating in it were able to avoid dead-end search paths, thereby significantly accelerating the achievement of the final goal.

Experience of recent enemies and allies

Naturally, the Soviet leadership could not remain indifferent to German atomic developments. At the end of the war, a group of Soviet physicists was sent to Germany, among whom were future academicians Artsimovich, Kikoin, Khariton, Shchelkin. Everyone was camouflaged in the uniform of Red Army colonels. The operation was led by First Deputy People's Commissar of Internal Affairs Ivan Serov, which opened any doors. In addition to the necessary German scientists, the “colonels” found tons of uranium metal, which, according to Kurchatov, shortened the work on the Soviet bomb by at least a year. The Americans also removed a lot of uranium from Germany, taking along the specialists who worked on the project. And in the USSR, in addition to physicists and chemists, they sent mechanics, electrical engineers, and glassblowers. Some were found in prisoner of war camps. For example, Max Steinbeck, the future Soviet academician and vice-president of the Academy of Sciences of the GDR, was taken away when, at the whim of the camp commander, he was making a sundial. In total, at least 1,000 German specialists worked on the nuclear project in the USSR. The von Ardenne laboratory with a uranium centrifuge, equipment from the Kaiser Institute of Physics, documentation, and reagents were completely removed from Berlin. As part of the atomic project, laboratories “A”, “B”, “C” and “D” were created, the scientific directors of which were scientists who arrived from Germany.

K.A. Petrzhak and G. N. Flerov In 1940, in the laboratory of Igor Kurchatov, two young physicists discovered a new, very unique type of radioactive decay of atomic nuclei - spontaneous fission.

Laboratory “A” was led by Baron Manfred von Ardenne, a talented physicist who developed a method of gas diffusion purification and separation of uranium isotopes in a centrifuge. At first, his laboratory was located on Oktyabrsky Pole in Moscow. Each German specialist was assigned five or six Soviet engineers. Later the laboratory moved to Sukhumi, and over time the famous Kurchatov Institute grew up on Oktyabrsky Field. In Sukhumi, on the basis of the von Ardenne laboratory, the Sukhumi Institute of Physics and Technology was formed. In 1947, Ardenne was awarded the Stalin Prize for creating a centrifuge for purifying uranium isotopes on an industrial scale. Six years later, Ardenne became a two-time Stalinist laureate. He lived with his wife in a comfortable mansion, his wife played music on a piano brought from Germany. Other German specialists were not offended either: they came with their families, brought with them furniture, books, paintings, and were provided with good salaries and food. Were they prisoners? Academician A.P. Aleksandrov, himself an active participant in the atomic project, noted: “Of course, the German specialists were prisoners, but we ourselves were prisoners.”

Nikolaus Riehl, a native of St. Petersburg who moved to Germany in the 1920s, became the head of Laboratory B, which conducted research in the field of radiation chemistry and biology in the Urals (now the city of Snezhinsk). Here, Riehl worked with his old friend from Germany, the outstanding Russian biologist-geneticist Timofeev-Resovsky (“Bison” based on the novel by D. Granin).

In December 1938, German physicists Otto Hahn and Fritz Strassmann were the first in the world to artificially split the nucleus of a uranium atom.

Having received recognition in the USSR as a researcher and talented organizer, able to find effective solutions to complex problems, Dr. Riehl became one of the key figures in the Soviet atomic project. After successfully testing a Soviet bomb, he became a Hero of Socialist Labor and a Stalin Prize laureate.

The work of Laboratory "B", organized in Obninsk, was headed by Professor Rudolf Pose, one of the pioneers in the field of nuclear research. Under his leadership, fast neutron reactors were created, the first nuclear power plant in the Union, and the design of reactors for submarines began. The facility in Obninsk became the basis for the organization of the Physics and Energy Institute named after A.I. Leypunsky. Pose worked until 1957 in Sukhumi, then at the Joint Institute for Nuclear Research in Dubna.

The head of Laboratory "G", located in the Sukhumi sanatorium "Agudzery", was Gustav Hertz, the nephew of the famous physicist of the 19th century, himself a famous scientist. He was recognized for a series of experiments that confirmed Niels Bohr's theory of the atom and quantum mechanics. The results of his very successful activities in Sukhumi were later used at an industrial installation built in Novouralsk, where in 1949 the filling for the first Soviet atomic bomb RDS-1 was developed. For his achievements within the framework of the atomic project, Gustav Hertz was awarded the Stalin Prize in 1951.

German specialists who received permission to return to their homeland (naturally, to the GDR) signed a non-disclosure agreement for 25 years about their participation in the Soviet atomic project. In Germany they continued to work in their specialty. Thus, Manfred von Ardenne, twice awarded the National Prize of the GDR, served as director of the Institute of Physics in Dresden, created under the auspices of the Scientific Council for the Peaceful Applications of Atomic Energy, headed by Gustav Hertz. Hertz also received a national prize as the author of a three-volume textbook on nuclear physics. Rudolf Pose also worked there, in Dresden, at the Technical University.

The participation of German scientists in the atomic project, as well as the successes of intelligence officers, in no way detract from the merits of Soviet scientists, whose selfless work ensured the creation of domestic atomic weapons. However, it must be admitted that without the contribution of both of them, the creation of the nuclear industry and atomic weapons in the USSR would have dragged on for many years.

The American Robert Oppenheimer and the Soviet scientist Igor Kurchatov are usually called the fathers of the atomic bomb. But considering that work on the deadly was carried out in parallel in four countries and, in addition to scientists from these countries, people from Italy, Hungary, Denmark, etc., took part in it, the resulting bomb can rightly be called the brainchild of different peoples.

Germany starts and... loses

Over the course of two years, Heisenberg's group carried out the research necessary to create a nuclear reactor using uranium and heavy water. It was confirmed that only one of the isotopes, namely uranium-235, contained in very small concentrations in ordinary uranium ore, can serve as an explosive. The first problem was how to isolate it from there. The starting point of the bomb program was a nuclear reactor, which required graphite or heavy water as a reaction moderator. German physicists chose water, thereby creating a serious problem for themselves. After the occupation of Norway, the world's only heavy water production plant at that time passed into the hands of the Nazis. But there, at the beginning of the war, the supply of the product needed by physicists was only tens of kilograms, and even they did not go to the Germans - the French stole valuable products literally from under the noses of the Nazis. And in February 1943, British commandos sent to Norway, with the help of local resistance fighters, put the plant out of commission. The implementation of Germany's nuclear program was under threat. The misfortunes of the Germans did not end there: an experimental nuclear reactor exploded in Leipzig. The uranium project was supported by Hitler only as long as there was hope of obtaining super-powerful weapons before the end of the war he started. Heisenberg was invited by Speer and asked directly: “When can we expect the creation of a bomb capable of being suspended from a bomber?” The scientist was honest: “I believe it will take several years of hard work, in any case, the bomb will not be able to influence the outcome of the current war.” The German leadership rationally considered that there was no point in forcing events. Let the scientists work quietly - you'll see they'll be in time for the next war. As a result, Hitler decided to concentrate scientific, production and financial resources only on projects that would give the fastest return in the creation of new types of weapons. Government funding for the uranium project was curtailed. Nevertheless, the work of scientists continued.

Meanwhile overseas

Experience of recent enemies and allies

Little Boy
The American uranium bomb that destroyed Hiroshima had a cannon design. Soviet nuclear scientists, when creating the RDS-1, were guided by the “Nagasaki bomb” - Fat Boy, made of plutonium using an implosion design.

Manfred von Ardenne, who developed a method for gas diffusion purification and separation of uranium isotopes in a centrifuge.

Operation Crossroads was a series of atomic bomb tests conducted by the United States at Bikini Atoll in the summer of 1946. The goal was to test the effect of atomic weapons on ships.

Help from overseas

Pioneers of nuclear fission

K. A. Petrzhak and G. N. Flerov
In 1940, in the laboratory of Igor Kurchatov, two young physicists discovered a new, very unique type of radioactive decay of atomic nuclei - spontaneous fission.

Otto Hahn
In December 1938, German physicists Otto Hahn and Fritz Strassmann were the first in the world to artificially split the nucleus of a uranium atom.

In the 30s of the last century, many physicists worked on creating an atomic bomb. It is officially believed that the United States was the first to create, test and use the atomic bomb. However, recently I read books by Hans-Ulrich von Kranz, a researcher of the secrets of the Third Reich, where he claims that the Nazis invented the bomb, and the world's first atomic bomb was tested by them in March 1944 in Belarus. The Americans seized all the documents about the atomic bomb, the scientists and the samples themselves (there were supposedly 13 of them). So the Americans had access to 3 samples, and the Germans transported 10 to a secret base in Antarctica. Kranz confirms his conclusions by the fact that after Hiroshima and Nagasaki in the United States there was no news of testing bombs larger than 1.5, and after that the tests were unsuccessful. This, in his opinion, would have been impossible if the bombs had been created by the United States itself.

We are unlikely to know the truth.

In one thousand nine hundred and forty, Enrico Fermi finished working on a theory called the Nuclear Chain Reaction. After this, the Americans created their first nuclear reactor. In one thousand nine hundred and forty-five, the Americans created three atomic bombs. The first was blown up in New Mexico, and the next two were dropped on Japan.

It is hardly possible to specifically name any person that he is the creator of atomic (nuclear) weapons. Without the discoveries of predecessors there would have been no final result. But many people call Otto Hahn, a German by birth, a nuclear chemist, the father of the atomic bomb. Apparently, it was his discoveries in the field of nuclear fission, together with Fritz Strassmann, that can be considered fundamental in the creation of nuclear weapons.

Igor Kurchatov and Soviet intelligence and Klaus Fuchs personally are considered to be the father of Soviet weapons of mass destruction. However, we should not forget about the discoveries of our scientists in the late 30s. Work on uranium fission was carried out by A.K. Peterzhak and G.N. Flerov.

The atomic bomb is a product that was not invented immediately. It took dozens of years of various studies to reach the result. Before specimens were first invented in 1945, many experiments and discoveries were carried out. All scientists who are related to these works can be counted among the creators of the atomic bomb. Besom speaks directly about the team of inventors of the bomb itself, then there was a whole team, it’s better to read about it on Wikipedia.

A large number of scientists and engineers from various industries took part in the creation of the atomic bomb. It would be unfair to name just one. The material from Wikipedia does not mention the French physicist Henri Becquerel, the Russian scientists Pierre Curie and his wife Maria Sklodowska-Curie, who discovered the radioactivity of uranium, and the German theoretical physicist Albert Einstein.

Quite an interesting question.

After reading information on the Internet, I came to the conclusion that the USSR and the USA began working on creating these bombs at the same time.

I think you will read in more detail in the article. Everything is written there in great detail.

Many discoveries have their own parents, but inventions are often the collective result of a common cause, when everyone contributed. In addition, many inventions are, as it were, a product of their era, so work on them is carried out simultaneously in different laboratories. So it is with the atomic bomb, it does not have one single parent.

Quite a difficult task, it is difficult to say who exactly invented the atomic bomb, because many scientists were involved in its appearance, who consistently worked on the study of radioactivity, uranium enrichment, chain reaction of fission of heavy nuclei, etc. Here are the main points of its creation:

By 1945, American scientists had invented two atomic bombs Baby weighed 2722 kg and was equipped with enriched Uranium-235 and Fat man with a charge of Plutonium-239 with a power of more than 20 kt, it had a mass of 3175 kg.

At this time, they are completely different in size and shape.

Work on nuclear projects in the USA and USSR began simultaneously. In July 1945, an American atomic bomb (Robert Oppenheimer, head of the laboratory) was exploded at the test site, and then, in August, bombs were also dropped on the infamous Nagasaki and Hiroshima. The first test of a Soviet bomb took place in 1949 (project manager Igor Kurchatov), but as they say, its creation was made possible thanks to excellent intelligence.

There is also information that the Germans were the creators of the atomic bomb. You can, for example, read about this here..

There is simply no clear answer to this question - many talented physicists and chemists worked on the creation of a deadly weapon capable of destroying the planet, whose names are listed in this article - as we see, the inventor was far from alone.

The history of human development has always been accompanied by wars as a way to resolve conflicts through violence. Civilization has suffered more than fifteen thousand small and large armed conflicts, the loss of human lives is estimated in the millions. In the nineties of the last century alone, more than a hundred military clashes occurred, involving ninety countries of the world.

At the same time, scientific discoveries and technological progress have made it possible to create weapons of destruction of ever greater power and sophistication of use. In the twentieth century Nuclear weapons became the peak of mass destructive impact and a political instrument.

Atomic bomb device

Modern nuclear bombs as means of destroying the enemy are created on the basis of advanced technical solutions, the essence of which is not widely publicized. But the main elements inherent in this type of weapon can be examined using the example of the design of a nuclear bomb codenamed “Fat Man,” dropped in 1945 on one of the cities of Japan.

The power of the explosion was 22.0 kt in TNT equivalent.

It had the following design features:

the length of the product was 3250.0 mm, with a diameter of the volumetric part - 1520.0 mm. Total weight more than 4.5 tons;
the body is elliptical in shape. To avoid premature destruction due to anti-aircraft ammunition and other unwanted impacts, 9.5 mm armored steel was used for its manufacture;
the body is divided into four internal parts: the nose, two halves of the ellipsoid (the main one is a compartment for the nuclear filling), and the tail.
the bow compartment is equipped with batteries;
the main compartment, like the nasal one, is vacuumized to prevent the entry of harmful environments, moisture, and to create comfortable conditions for the bearded man to work;
the ellipsoid housed a plutonium core surrounded by a uranium tamper (shell). It played the role of an inertial limiter for the course of the nuclear reaction, ensuring maximum activity of weapons-grade plutonium by reflecting neutrons to the side of the active zone of the charge.

A primary source of neutrons, called an initiator or “hedgehog,” was placed inside the nucleus. Represented by beryllium spherical in diameter 20.0 mm with polonium-based outer coating - 210.

It should be noted that the expert community has determined that this design of nuclear weapons is ineffective and unreliable in use. Neutron initiation of the uncontrolled type was not used further .

Operating principle

The process of fission of the nuclei of uranium 235 (233) and plutonium 239 (this is what a nuclear bomb is made of) with a huge release of energy while limiting the volume is called a nuclear explosion. The atomic structure of radioactive metals has an unstable form - they are constantly divided into other elements.

The process is accompanied by the detachment of neurons, some of which fall on neighboring atoms and initiate a further reaction, accompanied by the release of energy.

The principle is as follows: shortening the decay time leads to greater intensity of the process, and the concentration of neurons on bombarding the nuclei leads to a chain reaction. When two elements are combined to a critical mass, a supercritical mass is created, leading to an explosion.

In everyday conditions, it is impossible to provoke an active reaction - high speeds of approach of the elements are needed - at least 2.5 km/s. Achieving this speed in a bomb is possible by using combining types of explosives (fast and slow), balancing the density of the supercritical mass producing an atomic explosion.

Nuclear explosions are attributed to the results of human activity on the planet or its orbit. Natural processes of this kind are possible only on some stars in outer space.

Atomic bombs are rightfully considered the most powerful and destructive weapons of mass destruction. Tactical use solves the problem of destroying strategic, military targets on the ground, as well as deep-based ones, defeating a significant accumulation of enemy equipment and manpower.

It can be applied globally only with the goal of complete destruction of the population and infrastructure in large areas.

To achieve certain goals and perform tactical and strategic tasks, explosions of atomic weapons can be carried out by:

at critical and low altitudes (above and below 30.0 km);
in direct contact with the earth's crust (water);
underground (or underwater explosion).

A nuclear explosion is characterized by the instantaneous release of enormous energy.

Leading to damage to objects and people as follows:

Shock wave. When an explosion occurs above or on the earth's crust (water) it is called an air wave; underground (water) it is called a seismic explosion wave. An air wave is formed after critical compression of air masses and propagates in a circle until attenuation at a speed exceeding sound. Leads to both direct damage to manpower and indirect damage (interaction with fragments of destroyed objects). The action of excess pressure makes the equipment non-functional by moving and hitting the ground;
Light radiation. The source is the light part formed by the evaporation of the product with air masses; for ground use, it is soil vapor. The effect occurs in the ultraviolet and infrared spectrum. Its absorption by objects and people provokes charring, melting and burning. The degree of damage depends on the distance of the epicenter;
Penetrating radiation- these are neutrons and gamma rays moving from the place of rupture. Exposure to biological tissue leads to ionization of cell molecules, leading to radiation sickness in the body. Damage to property is associated with fission reactions of molecules in the damaging elements of ammunition.
Radioactive contamination. During a ground explosion, soil vapors, dust, and other things rise. A cloud appears, moving in the direction of the movement of air masses. Sources of damage are represented by fission products of the active part of a nuclear weapon, isotopes, and undestroyed parts of the charge. When a radioactive cloud moves, continuous radiation contamination of the area occurs;
Electromagnetic pulse. The explosion is accompanied by the appearance of electromagnetic fields (from 1.0 to 1000 m) in the form of a pulse. They lead to failure of electrical devices, controls and communications.

The combination of factors of a nuclear explosion causes varying levels of damage to enemy personnel, equipment and infrastructure, and the fatality of the consequences is associated only with the distance from its epicenter.

History of the creation of nuclear weapons

The creation of weapons using nuclear reactions was accompanied by a number of scientific discoveries, theoretical and practical research, including:

1905— the theory of relativity was created, which states that a small amount of matter corresponds to a significant release of energy according to the formula E = mc2, where “c” represents the speed of light (author A. Einstein);
1938— German scientists conducted an experiment on dividing an atom into parts by attacking uranium with neutrons, which ended successfully (O. Hann and F. Strassmann), and a physicist from Great Britain explained the fact of the release of energy (R. Frisch);
1939- scientists from France that when carrying out a chain of reactions of uranium molecules, energy will be released that can produce an explosion of enormous force (Joliot-Curie).

The latter became the starting point for the invention of atomic weapons. Parallel development was carried out by Germany, Great Britain, the USA, and Japan. The main problem was the extraction of uranium in the required volumes for conducting experiments in this area.

The problem was solved faster in the USA by purchasing raw materials from Belgium in 1940.

As part of the project, called Manhattan, from 1939 to 1945, a uranium purification plant was built, a center for the study of nuclear processes was created, and the best specialists - physicists from all over Western Europe - were recruited to work there.

Great Britain, which carried out its own developments, was forced, after the German bombing, to voluntarily transfer the developments on its project to the US military.

It is believed that the Americans were the first to invent the atomic bomb. Tests of the first nuclear charge were carried out in the state of New Mexico in July 1945. The flash from the explosion darkened the sky and the sandy landscape turned to glass. After a short period of time, nuclear charges called “Baby” and “Fat Man” were created.

Nuclear weapons in the USSR - dates and events

The emergence of the USSR as a nuclear power was preceded by long work by individual scientists and government institutions. Key periods and significant dates of events are presented as follows:

1920 considered the beginning of the work of Soviet scientists on atomic fission;
Since the thirties the direction of nuclear physics becomes a priority;
October 1940— an initiative group of physicists came up with a proposal to use atomic developments for military purposes;
Summer 1941 in connection with the war, nuclear energy institutes were transferred to the rear;
Autumn 1941 year, Soviet intelligence informed the country's leadership about the beginning of nuclear programs in Britain and America;
September 1942- atomic research began to be carried out in full, work on uranium continued;
February 1943— a special research laboratory was created under the leadership of I. Kurchatov, and general management was entrusted to V. Molotov;

The project was led by V. Molotov.

August 1945- in connection with the conduct of nuclear bombing in Japan, the high importance of developments for the USSR, a Special Committee was created under the leadership of L. Beria;
April 1946- KB-11 was created, which began to develop samples of Soviet nuclear weapons in two versions (using plutonium and uranium);
Mid 1948— work on uranium was stopped due to low efficiency and high costs;
August 1949- when the atomic bomb was invented in the USSR, the first Soviet nuclear bomb was tested.

The reduction in product development time was facilitated by the high-quality work of intelligence agencies, who were able to obtain information on American nuclear developments. Among those who first created the atomic bomb in the USSR was a team of scientists led by Academician A. Sakharov. They have developed more promising technical solutions than those used by the Americans.

Atomic bomb "RDS-1"

In 2015 - 2017, Russia made a breakthrough in improving nuclear weapons and their delivery systems, thereby declaring a state capable of repelling any aggression.

First atomic bomb tests

After testing an experimental nuclear bomb in New Mexico in the summer of 1945, the Japanese cities of Hiroshima and Nagasaki were bombed on August 6 and 9, respectively.

The development of the atomic bomb was completed this year

In 1949, under conditions of increased secrecy, Soviet designers of KB-11 and scientists completed the development of an atomic bomb called RDS-1 (jet engine “C”). On August 29, the first Soviet nuclear device was tested at the Semipalatinsk test site. The Russian atomic bomb - RDS-1 was a “drop-shaped” product, weighing 4.6 tons, with a volumetric diameter of 1.5 m, and a length of 3.7 meters.

The active part included a plutonium block, which made it possible to achieve an explosion power of 20.0 kilotons, commensurate with TNT. The testing site covered a radius of twenty kilometers. The specifics of the test detonation conditions have not been made public to date.

On September 3 of the same year, American aviation intelligence established the presence in the air masses of Kamchatka of traces of isotopes indicating the testing of a nuclear charge. On the twenty-third, the top US official publicly announced that the USSR had succeeded in testing an atomic bomb.

The Soviet Union refuted the American statements with a TASS report, which spoke of large-scale construction on the territory of the USSR and large volumes of construction, including blasting, work, which caused the attention of foreigners. The official statement that the USSR had atomic weapons was made only in 1950. Therefore, there is still ongoing debate in the world about who was the first to invent the atomic bomb.