Cheat codes skyrim elder scrolls 5. Elven armor set

skyrim codes
1.2. The main characteristics of the hero

Codes in the game Skyrim
1.3. Character Skills

Codes in the game Skyrim
1.4. Character Perks

To upgrade all perks, do the following:

1. Using the AdvSkill [X] cheat, we raise any skill to level 100:

Example: AdvSkill Destruction 999999.

2. Apply the code Player.SetAV [N] 0 - set the skill level to 0.

Example: Player.SetAV Destruction 100.

3. After that, you can again add new experience to this skill. Repeat steps 1 and 2 to earn more ability points. From time to time we lower the level of the character to the previous value.

4. Earned points, which are several times more than usual, we spend on the purchase of all available perks in Skyrim.

All perks and spells can be added manually if you know their exact name.

Skirim codes
1.5. Increase damage from weapons, spells

These codes increase the effectiveness of skills by the required percentage (base value * N%). For combat skills, this means an increase in damage from all hits, spells of this type.

Example: Player.SetAV DestructionPowerMod 100

This code will increase the damage from destruction spells by 100%, that is, twice.

Cheats from Skyrim
1.6. The screams of dragons

Each line of the table contains three codes. You can only enter one of the three.

Shouts from Skyrim: Dawnguard DLC

Shouts of Skyrim: Dragonborn DLC

Open Shouts of Dragons must be activated with Dragon Souls before use. In the game, Souls are only given for killing dragons. With the help of codes, you can add the necessary Souls to your inventory:

To activate dragon screams, press: "Tab" - "Magic" - "Screams", select a cry, press "R" - "Ok". After that, the selected shout can be used.

TES 5: Skyrim Cheats
1.7. Healing from diseases

2. Codes for getting items

TES V: Skyrim codes
2.1. Standard inventory management commands

skyrim 5 cheats
2.2. Codes for gold

The Elder Scrolls V codes
2.3. Armor sets (sets)

Daedric Armor Set

Draconic Shell Armor Set

Draconic Scale Armor Set

Unique armor with bonuses

Masks (helmets) with bonuses

The Elder Scrolls 5 codes
2.4. Weapon sets

Maces, Axes, axes

Unique weapons with bonuses

Cheats for the game Skyrim
2.5. Accessories

Cheats Skyrim
2.6. Consumables: Ingredients, Soul Stones, Potions, Arrows

Soul Stones

Cheats from the game Skyrim 5
2.7. Treasure chests

The game itself provides special cheat chests, which contain all items of a certain type. For example, in one chest are all kinds of staves, in the other - all kinds of arrows.

Notes:

After opening cheat chests, the game can freeze a lot. In this case, you just need to wait no more than 1 minute.

If, after opening such a chest, you do not look at the items, but immediately take all the contents (the "R" key), then the game can be frozen.

Skyrim cheat codes
2.8. Enchanting (upgrading) weapons and armor

Enchantment is a skill with which you can independently add magical properties to ordinary objects.

Rules for creating enchanted items:

You can only upgrade the base item, no other enchantments;

Each item can have a maximum of 2 enchantments;

The quality of the enchantment depends on the Enchanting skill;

1) upgrade the Enchantment skill to level 100 - Player.SetAV Enchanting 100.

2) open all enchantment perks (way to upgrade perks).

There is a cheat code for adding an already finished enchanted item to the inventory. To do this, you need to know the base item code and the enchantment code:

Once enchanted, the item will have a very small charge (170-350). To increase the charge of a weapon, you must pick it up and enter the following code:

skyrim cheat codes
2.9. Legendary weapons and armor

Legendary weapons and armor are standard items, but with significantly improved performance. These things are created by professional blacksmiths (skill level from 91 to 100). The percentage of item improvement directly depends on the level of the Blacksmithing skill. The higher the skill, the better the characteristics of the created legendary item will be.

What you need to upgrade weapons and armor to legendary quality:

1) blacksmithing level 91+;

2) workbench;

3) conventional armor or weapons;

4) ingredients to improve (different for all things).

All these things in Skyrim can be obtained in the usual way, but it will take a long time. With the help of cheat codes, this process can be greatly accelerated. Enter the following codes:

1) Player.SetAV Smithing 100- we pump "Blacksmithing" to level 100;

2) Player.PlaceAtMe 000D932F- create a workbench right in front of you;

3) Player.AddItem [number]– add a blank item to the inventory (item codes can be viewed here).

4) In the game, we approach the workbench, look at what ingredients are needed to improve the selected item;

5) Player.AddItem [number]– add the necessary ingredients to the inventory (item codes can be viewed here);

6) We approach the workbench, we improve the item to legendary quality.

TES V: Skyrim codes
2.10. How to find the ID of an item

You can add absolutely any item to your inventory, the main thing is to know its game code. If you already have some unique item, and you want to create several more copies of this item, then you can determine the item code:

1) In the console, enter the code: Player.ShowInventory

Note. This method always works, but if you have too many items in your inventory, it may be difficult to find the item you need. In this case, use the second method.

1) The item whose ID you need to find out is placed in an empty box (barrel, chest, bag or something else).

2) We approach the box as close as possible (preferably sit down).

3) Open the console, click on the box in which our item lies, enter the command INV.

4) We are looking for the necessary item by name and look at the ID of the item.

Having learned the item code, we use it in a standard cheat to add an item:

3. Codes for placing objects

Skyrim cheats and codes
3.1. Determining the object code

These commands work only when a certain object is selected in the console. To select an object in the console, you just need to click on it with the mouse. After selecting an object, an inscription with the object code (object_ID) will appear in the console.

To scroll through the text in the console, if there is a lot of it, use the "Page Up" and "Page Down" keys.

If you want to apply several commands to the same selected character or object, then you do not need to select it with the mouse each time, it is enough to select only 1 time (the selection is saved).

There are many invisible objects in the game (sound sources, light sources, quest zones), they can be mistakenly selected instead of the necessary item, so it is advisable to be as close to the object as possible to make it easier to hit it. Various game special effects (fog, snow, blizzard) also complicate the process of selecting an object.

Objects that are out of view of the screen can only be selected in the console by their game ID code. This is done using the PRID [item code] command.

skyrim console commands
3.2. Placement of objects

For the following commands to work, you must first select the object - open the console and click on the object. After that, an inscription (object ID) should appear in the middle of the console screen.

(All the objects you create have an ID that starts with FF000...)

Notes:

To apply several commands to the same object, you do not need to select it again each time, the selection is saved.

Sometimes, after applying the Setpos and GetAngle commands, the object moves only visually, physically it remains in the same place (the texture is shifted, not the object itself). To fully move an object, you need to select it and enter two more commands: Disable And enable. You can also enter the command Setscale 1 to update the physical model of the item.

To align an incorrectly placed item, enter:

SetAngle x 0, SetAngle y 0, SetAngle z [any number].

Object management

Cheats from Skyrim
3.3. Objects for home

Many Skyrim players have their own home or favorite place where they spend a lot of time. But not every place has the necessary jobs: alchemy tables, forges, workbenches.

These cheat codes allow you to install jobs anywhere:

Furniture for home

When created, all items appear in front of you in the direction you are facing. To set the item straight, before introducing the cheat, center your gaze so that the character looks straight ahead, and not up or down.

Mannequin Codes:

4. Codes for fast travel

5. Codes for friendly characters (NPCs)

skyrim codes
5.1. Stop fight with NPC

1) We get up so that at once all the characters who attacked us are visible on the screen.

2) Turn on the console, select each NPC in turn, enter the codes for them:

3) Player.SetCrimeGold 0- turn off the reward for our head;

4) Stop Combat– turn off the aggressive behavior of the character.

5) Only after we turn off the reward for our head from all enemies, we can close the console. (If at least one NPC is not coded, he will start attacking us again, and after him all the other NPCs will become aggressive again. The remaining hostile characters are clearly visible on the minimap, they are highlighted with red dots, you must definitely apply the code to all) .

These commands do not work on our permanent enemies (monsters and some story characters) who always attack us.

Skyrim cheat codes
5.2. NPC customization

Setting the physical properties of the NPC:

Customization of the personality, characteristics, skills of the NPC:

NPC equipment setup:

Setting up movements, NPC relations:

Skyrim V codes
5.3. NPC control

With the help of these cheats, you can take control of any monster or character. Do everything strictly in the specified sequence:

1) Switch to third person view (F key).

2) We approach the desired character or monster, whom we want to move into.

3) Open the console, select the monster with a mouse click, enter the codes:

5) Player.TC- Control the main character

6) TC- Control an NPC or creature

8) Close the console.

Notes:

After gaining control over the NPC, you can only move with it and cannot attack.

If you press attack, then your main character will attack, and not the one under your control. How to make NPCs attack is unknown.

To return to the normal game and take control of your main character, type in the console:

Cheats in the game Skyrim
5.4. Companions NPCs

In Skyrim, almost any character can be made your partner so that he follows us and helps in battles. To do this, we do the following:

1) We approach the required character, open the console, click on the character. Let's start typing codes:

2) SetRelationshipRank Player 3– transfer the character to a group of possible allies.

3) AddFac 0005C84D 1- add the necessary dialogue.

4) Close the console, continue the game. We speak with the character, select the dialog that appears: “Follow me. I need your help".

6. Codes for completing quests

There are a lot of additional quests in Skyrim, which can take several months to complete. Quests are a chain of several tasks (quest stages). With the help of codes, you can quickly go through both individual stages of quests, and quests as a whole.

View codes from Skyrim
6.1. Quest Search

How to move to the quest objective:

ShowQuestTargets- get the ID-code of the quest. (Quest IDs, after the introduction of ShowQuestTargets, are located in exactly the same sequence as in the Quest Log).

4) In the resulting list, look for Current quest: , remember this ID. (To scroll through the text in the console, press the "PageUp" and "PageDown" keys).

5) Now enter MoveToQt to teleport to the quest target.

What are the codes in Skyrim
6.2. Passage of the quest

Complete the quest step with the code:

1) We save the game and do not overwrite this save until we complete the quest.

2) Open your list of tasks (key "J"). Select the quest you want to complete and press Enter.

3) Open the console and enter ShowQuestTargets- get the ID-code of the quest.

4) Enter GetStage. The stage of this quest will appear in the console in the following form: GetStage >> [number].00. We remember the number of the current stage of the quest.

5) Enter SQS- get a list of all stages of the specified quest in the following form Stage [stage]: 1 (or 0). 1 - means that the stage has been passed, 0 - the stage has not yet been completed. In the resulting list, we are looking for our memorized stage of the quest. Remember the number of the next step.

6) Enter SetStage [stage]- set the stage of the quest. As a stage, enter the number of the next stage.

7) Enter MoveToQt- teleportation to the target of the selected task.

We begin to independently pass the next stage of the quest.

Complete the entire quest with the code:

If you complete a quest with the CompleteQuest command, it will simply be marked as completed and you will no longer be able to continue it. At the same time, you will not receive any reward for such a quest.

To receive all the rewards for the quest, you must complete all of its component stages one by one. To do this, execute commands 6), 7) from the previous paragraph until all stages in the quest are completed. This is how you can complete any quest 100%.

7. Other codes

RPG Skyrim Cheats
7.1. Graphics and animation settings

skyrim codes
7.2. Game settings

8. Solving problems with entering codes

skyrim codes
8.1. Remove squares when entering cheat codes

It often happens that when entering codes into the Skyrim console, not letters and numbers are displayed on the screen, but empty squares. This happens because the letters of the Russian alphabet are entered, and they are not supported in the game console. There are several methods to solve this problem.

Method 1. Switching the font in the game

Press the "Scroll Lock" key to switch the alphabet right in the game. (It doesn't always work!)

Method 2. Change the font

1) Go to the folder with the game, find the file: Skyrim\Data\Interface\fontconfig.txt.

2) In the properties of this file, remove the checkmark "Read only".

3) Open the file, replace the following line:

Map "$ConsoleFont" = "Arial" Normal
on
map "$ConsoleFont" = "FuturaTCYLigCon" Normal

Method 3. Set the English language in the console

If for some reason you can’t remove the squares in the console, then enter the cheat codes as they are. In this case, you will not see what you enter, but the codes will work. But before that, it is imperative to change the language in the console to English:

1) Go to C:\Users\[username]\Documents\My Games\Skyrim

2) Open the Skyrim.ini file.

3) In the text of the Skyrim.ini file after the lines:

sLanguage=RUSSIAN

add (not replace) the following line:

SConsole=ENGLISH

Method 4 - Set the English Language in the Steam Client

During the game, press the key combination "Shift" + "Tab". Right click on your Steam nickname, click change language, select "EN".

If none of the methods work, and you are the owner of a non-original version of the game, then you should consider looking for another image with the game or purchase the original version.

Method 5. Set the default language to English in the OS

If it is not possible to change the input language using sConsole=ENGLISH, then you need to set the default language to English in the computer's operating system.

1) "Start" menu, line "Run ..."

2) Enter the text: control international

3) Go to the tab "Languages", "Details..."

1) Go to "Start", the line "Control Panel"

2) In the panel, select "Regional and Language Options", tab "Languages ​​and Keyboards"

3) Select "Change keyboard..."

4) Find "Default input language" and select "English (United States)", "Ok".

1) In the lower right corner of the desktop screen, click on the inscription "RUS".

2) In the "Language Settings" menu, select "English. Keyboard layout: USA.

3) Move the selected line to the very top - press the "Up" button.

After that, the codes in Skyrim should display normally.

This category contains codes for Skyrim. The codes will help you get through particularly difficult places in the game, which you are prevented from overcoming by the lack of powerful weapons, mana, any spells, lack of gold or insufficiently pumped skills. With the help of codes, you can also increase the level of your character, experiment with skills and spells.

What are codes for skyrim 5?

- these are "secret" commands that are introduced into games and programs in order to change the course of their work in the interests of the hacker, to get additional features. Thanks to cheats, not very persistent and dexterous players can complete the game without thinking about health, mana and gold reserves. In Skyrim, codes also allow you to explore in detail individual aspects of the game, temporarily removing restrictions that prevent exploration in the normal game mode.

As a rule, the official information about the game does not contain information about the codes. Usually they appear some time after the release. Sometimes codes are discovered by hackers analyzing the game code, but more often than not, the developers themselves “leak” information in order to warm up the interest of fans in the game and increase the audience at the expense of less successful players.

Often the code is a sequence of characters (letters, numbers, and even whole sentences). For example, the most frequently requested codes for Skyrim 5 look like this:

• Level up: advlevel
• Disable detection: TDetect
• Immortality: tim

How to use codes on Skyrim?

Sometimes, instead of symbols, squares are displayed in the console, and the codes themselves do not work. You can fix this problem as follows:

1. you need to open a text file located along the path "Skyrim\\Data\\Interface\\fontconfig.txt"
2. change the font line in the console to this: "map

Cautions

You should also remember that you will not be able to receive Steam achievements in the session in which you used the codes. In order for the achievement to return, you will need to restart the game.

Cheat codes in the game Skyrim 5 (The Elder Scrolls V: Skyrim) allow you to customize the game as you wish.

How to enter codes:

1. Press the "~" (tilde) key to open the console window.
2. Enter the required code (all codes are listed below).
3. Press the "Enter" key to run the code.
4. Press the Esc key to close the console window.

Rules for entering codes:

• The commands are not case sensitive (that is, the letters "A" and "a" are identical).
• In writing some codes there are symbols of square brackets - . This means that instead of these brackets, you need to enter any suitable value. You don't need to enter the parentheses themselves. For example: instead of Player.SetAV [#], enter Player.SetAV HeavyArmor 100.

All cheat codes for Skyrim 5

Character Upgrade Codes

Skyrim 5 cheats - Hero superpowers

Skyrim 5 codes - Main characteristics of the hero

Codes in the game Skyrim - Character Skills

Increasing experience in skills:

Setting the skill level:

Codes in the game Skyrim - Character Perks

With the help of these cheat codes for Skyrim, you can quickly upgrade all the skills and get all the perks. To do this, we need the following cheats:

To upgrade all perks, do the following:

1. Using the AdvSkill [X] cheat, we raise any skill to level 100:
   1. Example: AdvSkill Destruction 999999.
2. Apply the code Player.SetAV [N] 0 - set the skill level to 0.
   1. Example: Player.SetAV Destruction 100.
3. After that, you can again add new experience to this skill. Repeat steps 1 and 2 to earn more ability points. From time to time we lower the level of the character to the previous value.
4. The earned points, which are several times more than usual, are spent on the purchase of all available perks in Skyrim.

All perks and spells can be added manually if you know their exact name.

Skyrim codes - Increasing damage from weapons, spells

These codes increase the effectiveness of skills by the required percentage (base value * N%). For combat skills, this means an increase in damage from all hits, spells of this type.

Example: Player.SetAV DestructionPowerMod 100

This code will increase the damage from destruction spells by 100%, that is, twice.

Cheats from Skyrim - The screams of dragons

Each line of the table contains three codes. You can only enter one of the three.

Shouts from Skyrim: Dawnguard DLC

Shouts of Skyrim: Dragonborn DLC

Open Shouts of Dragons must be activated with Dragon Souls before use. In the game, Souls are only given for killing dragons. With the help of codes, you can add the necessary Souls to your inventory:

To activate dragon screams, press: "Tab" - "Magic" - "Screams", select a cry, press "R" - "Ok". After that, the selected shout can be used.

TES 5: Skyrim Cheats - Cure Diseases

Item Codes

TES V: Skyrim Cheats - Standard Inventory Management Commands

Skyrim 5 codes - Codes for gold

The Elder Scrolls V codes - Armor sets (sets)

Daedric Armor Set

Draconic Shell Armor Set

Draconic Scale Armor Set

Unique armor with bonuses

Masks (helmets) with bonuses

The Elder Scrolls 5 codes - Weapon sets

Maces, Axes, axes

Unique weapons with bonuses

Cheats for the game Skyrim - Accessories

Cheats Skyrim - Consumables: Ingredients, Soul Stones, Potions, Arrows

Soul Stones

Cheats from the game Skyrim 5 - Treasure chests

The game itself provides special cheat chests, which contain all items of a certain type. For example, in one chest are all kinds of staves, in the other - all kinds of arrows.

Notes:

After opening cheat chests, the game can freeze a lot. In this case, you just need to wait no more than 1 minute.

If, after opening such a chest, you do not look at the items, but immediately take all the contents (the "R" key), then the game can be frozen.

Skyrim cheat codes - Enchanting (improving) weapons and armor

Enchantment is a skill with which you can independently add magical properties to ordinary objects.

Rules for creating enchanted items:

• You can only upgrade the base item, no other enchantments;
• each item can have no more than 2 enchantments;
• the quality of the enchantment depends on the Enchanting skill;

1. upgrade the Enchantment skill to level 100 - Player.SetAV Enchanting 100.
2. open all enchantment perks (a way to upgrade perks).

There is a cheat code for adding an already finished enchanted item to the inventory. To do this, you need to know the base item code and the enchantment code:

Once enchanted, the item will have a very small charge (170-350). To increase the charge of a weapon, you must pick it up and enter the following code:

Skyrim cheat codes - Legendary weapons and armor

Legendary weapons and armor are standard items, but with significantly improved performance. These things are created by professional blacksmiths (skill level from 91 to 100). The percentage of item improvement directly depends on the level of the Blacksmithing skill. The higher the skill, the better the characteristics of the created legendary item will be.

What you need to upgrade weapons and armor to legendary quality:

1. blacksmithing level 91+;
2. Workbench;
3. conventional armor or weapons;
4. ingredients to improve (different for all things).

All these things in Skyrim can be obtained in the usual way, but it will take a long time. With the help of cheat codes, this process can be greatly accelerated. Enter the following codes:

1. Player.SetAV Smithing 100- we pump "Blacksmithing" to level 100;
2. Player.PlaceAtMe 000D932F- create a workbench right in front of you;
3. Player.AddItem [number]– add a blank item to the inventory (item codes can be viewed here).
4. In the game, we approach the workbench, look at what ingredients are needed to improve the selected item;
5. Player.AddItem [number]– add the necessary ingredients to the inventory (item codes can be viewed here);
6. We approach the workbench, we improve the item to legendary quality.

TES V: Skyrim codes - How to find the item ID

You can add absolutely any item to your inventory, the main thing is to know its game code. If you already have some unique item, and you want to create several more copies of this item, then you can determine the item code:

Method 1

• Enter the following code in the console: Player.ShowInventory

Note. This method always works, but if you have too many items in your inventory, it may be difficult to find the item you need. In this case, use the second method.

Method 2

1. We put the item whose ID you need to find out in an empty box (barrel, chest, bag or something else).
2. We approach as close as possible to the box (it is desirable to sit down).
3. Open the console, click on the box in which our item lies, enter the command INV.
4. We are looking for the necessary item by name and look at the ID of the item.

Having learned the item code, we use it in a standard cheat to add an item:

Codes for placing objects

Skyrim cheats and codes - Determining the object code

These commands work only when a certain object is selected in the console. To select an object in the console, you just need to click on it with the mouse. After selecting an object, an inscription with the object code (object_ID) will appear in the console.

To scroll through the text in the console, if there is a lot of it, use the "Page Up" and "Page Down" keys.

If you want to apply several commands to the same selected character or object, then you do not need to select it with the mouse each time, it is enough to select only 1 time (the selection is saved).

There are many invisible objects in the game (sound sources, light sources, quest zones), they can be mistakenly selected instead of the necessary item, so it is advisable to be as close to the object as possible to make it easier to hit it. Various game special effects (fog, snow, blizzard) also complicate the process of selecting an object.

Objects that are out of view of the screen can only be selected in the console by their game ID code. This is done using the PRID [item code] command.

Skyrim console commands - Placement of objects

For the following commands to work, you must first select the object - open the console and click on the object. After that, an inscription (object ID) should appear in the middle of the console screen.

(All the objects you create have an ID that starts with FF000…)

Notes:

To apply several commands to the same object, you do not need to select it again each time, the selection is saved.

Sometimes, after applying the Setpos and GetAngle commands, the object moves only visually, physically it remains in the same place (the texture is shifted, not the object itself). To fully move an object, you need to select it and enter two more commands: Disable And enable. You can also enter the command Setscale 1 to update the physical model of the item.

To align an incorrectly placed item, enter:

SetAngle x 0, SetAngle y 0, SetAngle z [any number].

Object management

Cheats from Skyrim - Objects for the house

Many Skyrim players have their own home or favorite place where they spend a lot of time. But not every place has the necessary jobs: alchemy tables, forges, workbenches.

These cheat codes allow you to install jobs anywhere:

Furniture for home

When created, all items appear in front of you in the direction you are facing. To set the item straight, before introducing the cheat, center your gaze so that the character looks straight ahead, and not up or down.

Mannequin Codes:

Codes for fast travel

Codes for Friendly Characters (NPCs)

Skyrim cheats - Stop fight with NPC

1. We get up so that at once all the characters who attacked us are visible on the screen.
2. We turn on the console, select each NPC in turn, enter the codes for them:
3. Player.SetCrimeGold 0- turn off the reward for our head;
4. Stop Combat– turn off the aggressive behavior of the character.
5. Only after we turn off the reward for our head for all enemies, we can close the console. (If at least one NPC is not coded, he will start attacking us again, and after him all the other NPCs will become aggressive again. The remaining hostile characters are clearly visible on the minimap, they are highlighted with red dots, you must definitely apply the code to all) .

These commands do not work on our permanent enemies (monsters and some story characters) who always attack us.

Skyrim cheat codes - NPC customization

Setting the physical properties of the NPC:

Customization of the personality, characteristics, skills of the NPC:

NPC equipment setup:

Setting up movements, NPC relations:

Skyrim V Cheats - NPC Management

With the help of these cheats, you can take control of any monster or character. Do everything strictly in the specified sequence:

1. Switch to third person view (F key).
2. We approach the desired character or monster, whom we want to move into.
3. Open the console, select a monster with a mouse click, enter the codes:
4. Player.TC- Control the main character
5. TC- Control an NPC or creature
6. We close the console.

Notes:

After gaining control over the NPC, you can only move with it and cannot attack.

If you press attack, then your main character will attack, and not the one under your control. How to make NPCs attack is unknown.

To return to the normal game and take control of your main character, type in the console:

Cheats in the game Skyrim - Companions NPCs

In Skyrim, almost any character can be made your partner so that he follows us and helps in battles. To do this, we do the following:

1. We approach the required character, open the console, click on the character. Let's start typing codes:
2. SetRelationshipRank Player 3– transfer the character to a group of possible allies.
3. AddFac 0005C84D 1- add the necessary dialogue.
4. Close the console, continue the game. We speak with the character, select the dialog that appears: “Follow me. I need your help".

Codes for completing quests

There are a lot of additional quests in Skyrim, which can take several months to complete. Quests are a chain of several tasks (quest stages). With the help of codes, you can quickly go through both individual stages of quests, and quests as a whole.

View codes from Skyrim - Quest Search

How to move to the quest objective:

1. Open the console and enter ShowQuestTargets— get the ID-code of the quest. (Quest IDs, after the introduction of ShowQuestTargets, are located in exactly the same sequence as in the Quest Log).
2. In the resulting list, look for Current quest: , remember this ID. (To scroll through the text in the console, press the "PageUp" and "PageDown" keys).
3. Now we enter MoveToQt to teleport to the quest target.

What are the codes in Skyrim - Passage of the quest

Complete the quest step with the code:

1. We save the game and do not overwrite this save until we complete the quest.
2. Open your list of tasks (key "J"). Select the quest you want to complete and press Enter.
3. Open the console and enter ShowQuestTargets— get the ID-code of the quest.
4. Enter GetStage. The stage of this quest will appear in the console in the following form: GetStage >> [number].00. We remember the number of the current stage of the quest.
5. Enter SQS- we get a list of all stages of the specified quest in the following form Stage [stage]: 1 (or 0). 1 - means that the stage has been passed, 0 - the stage has not yet been completed. In the resulting list, we are looking for our memorized stage of the quest. Remember the number of the next step.
6. Enter SetStage [stage]- set the stage of the quest. As a stage, enter the number of the next stage.
7. Enter MoveToQt- teleportation to the target of the selected task.

We begin to independently pass the next stage of the quest.

Complete the entire quest with the code:

If you complete a quest with the CompleteQuest command, it will simply be marked as completed and you will no longer be able to continue it. At the same time, you will not receive any reward for such a quest.

To receive all the rewards for the quest, you must complete all of its component stages one by one. To do this, execute commands 6), 7) from the previous paragraph until all stages in the quest are completed. This is how you can complete any quest 100%.

Other codes

RPG Skyrim Cheats - Graphics, Animation Settings

Skyrim codes - Game settings

Solving problems with entering codes

Skyrim codes - Remove squares when entering cheat codes

It often happens that when entering codes into the Skyrim console, not letters and numbers are displayed on the screen, but empty squares. This happens because the letters of the Russian alphabet are entered, and they are not supported in the game console. There are several methods to solve this problem.

Method 1. Switching the font in the game

Press the "Scroll Lock" key to switch the alphabet right in the game. (It doesn't always work!)

Method 2. Change the font

1. We go into the folder with the game, find the file: Skyrim\Data\Interface\fontconfig.txt.
2. In the properties of this file, uncheck the "Read only" checkbox.
3. Open the file, replace the following line:

map "$ConsoleFont" = "Arial" Normal
on
map "$ConsoleFont" = "FuturaTCYLigCon" Normal

Method 3. Set the English language in the console

If for some reason you can’t remove the squares in the console, then enter the cheat codes as they are. In this case, you will not see what you enter, but the codes will work. But before that, it is imperative to change the language in the console to English:

1. Go to C:\Users\[username]\Documents\My Games\Skyrim
2. Open the Skyrim.ini file.
3. In the text of the Skyrim.ini file after the lines:

add (not replace) the following line:

sConsole=ENGLISH

Method 4 - Set the English Language in the Steam Client

During the game, press the key combination "Shift" + "Tab". Right click on your Steam nickname, click change language, select "EN".

If none of the methods work, and you are the owner of a non-original version of the game, then you should consider looking for another image with the game or purchase the original version.

Method 5. Set the default language to English in the OS

If it is not possible to change the input language using sConsole=ENGLISH, then you need to set the default language to English in the computer's operating system.

Windows XP:

1. Start Menu, Run...
2. Enter text: control international
3. Go to the "Languages" tab, "More ..."
4. Next, find the "Default Input Language", select "English (United States)", "Ok".

Windows 7:

1. Go to "Start", line "Control Panel"
2. In the panel, select "Regional and Language Options", tab "Languages ​​and Keyboards"
3. Select "Change Keyboard..."
4. Find "Default input language" and select "English (United States)", "Ok".

Windows 8:

1. In the lower right corner of the desktop screen, click on the inscription "RUS".
2. In the "Language Settings" menu, select "English. Keyboard layout: USA.
3. Move the selected line to the very top - press the "Up" button.

After that, the codes in Skyrim should display normally.

To open the console press [ ~ ] (tilde) and enter the following cheat codes:

Main list of cheat codes

SexChange - change gender to the opposite. Your face won't change :)
Showracemenu - open the character creation window, where you can change: race, gender, appearance and name of the character. After changing the race, in early versions of the game, your character level will become 1. It will also reset all pumped skills. In version 1.3.10.0 of the game, after changing the race, the level of the character remains the same. Don't forget to save your game before applying this command command. (added by Robin)

player.setav invisibility 1 - enable invisibility. After that, neither enemies nor friends will notice you. To disable invisibility, enter 0 instead of 1.

player.modav carryweight X- increase the maximum carrying capacity of the character by X units
player.setav speedmult X- set movement speed X%. Applied after running while holding down the [ alt]. Default: 100%.
player.setscale X- increase the growth of your character, where X: 1 - 100%, 2 -200%, etc.
setgs fJumpHeightMin 100 - 100% jump height (default).

player.setav Health X X units
player.setav Magicka X X units
player.setav Stamina X- set max. the amount of power in X units. If set to a high value, the character will not get tired while running.

player.setav attackdamagemult N- Increase weapon damage N times (added Avenger)
player.setav leftweaponspeedmult N- increase the attack speed of the weapon in the left hand in N once
player.setav weaponspeedmult N- increase the attack speed of the weapon in the right hand and two-handed weapons in N once

player.setav LeftItemCharge N N units
player.setav RightItemCharge N N units
Notes:

• all two-handed weapons are considered weapons in the right hand;
• a fully loaded weapon has a charge level of about 3000;
• each attack consumes about 30 units. weapon charge;
• charge level can be set above 3000.

player.setcrimegold 0 - Remove the bounty on your head

player.addspell 00092C48 - Lycanthropy. Skill for turning into a wolf / werewolf. Appears in the "Talents" section. To activate use the [Z] key. You can't cancel the skin. The reverse transformation into a person will occur automatically, after a certain period of time.

Vampirism

• player.addspell 000B8780- vampirism. Adds the Sanguinare Vampiris disease. 3 days after infection, you have a 10% chance that you will become a vampire. If after 3 days after using this code in the section "Magic" - "Active Effects" appears "Vulnerability to fire" - you are a vampire. And if nothing happened - use the command player.removespell 000B8780, after which again player.addspell 000B8780.
• player.removespell 000B8780- will be cured of vampirism, the disease "Sangvinare Vampiris", which appears at the first stage of transformation (after a bite). After turning into a vampire, this code does not work.
• setstage 000EAFD5 10- recover from vampirism. Always heals, but only works 1 time as healing happens after the quest is completed (this code ends the quest). (added 216623)

• save the game (new save, not quick save);
• enter resetquest 000EAFD5
• create another one new save and download it;
• enter setstage 000EAFD5 10

Teleportation

• player.moveto(without brackets) - teleport to the specified object (character)
• coc qasmoke- will move to the test location. There are all game items and devices for the manufacture of any items. (added by Robin)
• coc riverwood- exit the test location, move to "Riverwood". If you enter another name instead of "riverwood", then a teleport to the specified location will occur. How to find out the names of locations for teleportation, read a little below. (added by Robin)
• player.setpos [axis] [number](without brackets) - move your character to the specified coordinates. Instead of axis you must specify x,y or z. And instead numbers- offset along the selected axis.

• To find out your current location, enter player.getpos [axis](without brackets). This command needs to be run 3 times and instead of axis take turns writing x,y And z. Then write down / remember all three received numbers.
• If you know the exact coordinates to move, obtained earlier using the command player.getpos [axis](without brackets), then use the command player.setpos [axis] [number](without brackets) to move to the specified coordinates.
• Don't close the console until you run the command 3 times player.setpos [axis] [number](without brackets) for each of the coordinates (x,y,z).
• The move only happens after the console is closed.

How to find out the names of locations for the coc command

• open console
• enter help part_of_name_in_english 0 When entering the name of the location, there should not be spaces, and if they are, enter only the first word.
• using console scroll keys [ PageUp] And [ PageDown] find the following lines (there are many):
  • CELL: location_name (location id)(all this can be entered for the command coc)
• now that we already know the exact name for teleportation to the required location, we enter coc location_name

prid(without brackets) - select an object by its ID. An analogue to the following action: open the console - click on the object. After this command, the inscription should appear in the console ""(Object ID). After that, you can apply all the cheats written below without selecting the object. With this cheat code, you can select a very distant object and apply the necessary action to it. For example, resurrect someone or view the contents of the inventory.

With the help of these cheats, you can take control of any monster or character. Do everything strictly in the specified sequence.

• switch to "third person view" [ F] (will not work otherwise);
• we approach the necessary character or monster;
• open the console, click on it with the mouse and enter the following code;
• player.TC
• close the console.

Notes:

• After gaining control over the NPC, you can only move with it and cannot attack.
• If you press attack, then your main character will attack, and not the one under your control.
• How to make NPCs attack is unknown. If you find a solution to this problem - write in the comments.

Companions (partners)

• go to the required character;
• open the console and click on it (highlight);
• enter setrelationshiprank player 3
• enter addfac 0005C84D 1

set playerfollowercount to 0- adds a dialogue for taking new partners. After the introduction of this command, the old partners will continue to follow the player, but you can take another partner. As soon as you take someone else as your partner, the old partner stops following you. If no one is following you, there are no satellites, then this command is useless. The maximum number of partners is 1. It makes no sense to enter something else instead of 0 - it will not give any effect.

Strengthening skills

Example: player.setav DestructionPowerMod 100- increase damage from all spells of the school of destruction by 100%

• OneHandedPowerMod - one-handed weapon
• TwoHandedPowerMod - two-handed weapon
• MarksmanPowerMod - bows
• BlockPowerMod - shield
• SmithingPowerMod - blacksmithing
• HeavyArmorPowerMod - heavy armor
• LightArmorPowerMod - light armor
• PickPocketPowerMod - Pickpocketing
• LockpickingPowerMod - hack
• SneakPowerMod - Stealth
• AlchemyPowerMod - alchemy
• SpeechcraftPowerMod - eloquence
• AlterationPowerMod - change
• ConjurationPowerMod - sorcery
• DestructionPowerMod - destruction
• IllusionPowerMod - illusion
• RestorationPowerMod - restoration
• EnchantingPowerMod - enchantment

Remove squares when entering cheat codes

map "$ConsoleFont" = "Arial" Normal

map "$ConsoleFont" = "FuturaTCYLigCon" Normal

Note 1. If after that the file fontconfig.txt does not want to save or offers to save a copy of this file, then do the following:

• in the properties of this file, see if there is a checkmark " Only reading»;
• if it's worth it, remove it, change the file, save it and check this box back.

Set the English language in the console

Method 2- changing game files
Go to C:\Users\<имя_пользователя>\Documents\My Games\ Skyrim and open the file Skyrim.ini. After the lines:

sLanguage=RUSSIAN

add (not replace) the following line

During the game, press the key combination [ Shift]+[Tab]. Right click on your nickname, click change language and select EN.

This method will only work if you have the Steam version of the game.
After these steps, the language in the console Skyrim you will have English instead of Russian.

Note 1. To set the English language in the console, you must follow the instructions described in one of the three methods presented.

Note 2. To set the English language in the console, use "Method 1", as it works for 90% of all players with the original version of the game. If you do not have the original version of the game or the first method did not change the language in the console, provided that you did everything correctly, try the other methods described here.

Once again, "Method 1" works almost always if you have everything in order with the game itself. If it does not work and you are the owner of a non-original version of the game, then you should think about finding another image with the game or purchase the original version.

Pumping all skills and perks

• advskill N X- raise a skill N on X units of experience. The main team for pumping all skills and perks.
• player.setav N X- install X skill level N. This cheat does not add "ability points", but is required when your skill level reaches 100.
• player.setlevel N- set character level N(1-255). Can be used to lower a character's level after applying a cheat advskill.

Usage example:
advskill Destruction 100- raise "Destruction" by 100 experience (not levels)
player.setav Block 50- set skill level 50 "Block"

• Alchemy - alchemy
• Alteration - change
• Conjuration - sorcery
• Destruction - destruction
• Enchanting - enchantment
• Illusion - illusion
• Restoration - restoration
• Marksman - Shooting
• Block - block
• HeavyArmor - heavy armor
• LightArmor - light armor
• Lockpicking - Hacking
• Onehanded - one-handed weapon
• Twohanded - two-handed weapon
• Pickpocket - pickpocketing
• Smithing - blacksmithing
• Sneak - stealth
• Speechcraft - eloquence

1. With the help of a cheat advskill(description above) raise any skill to level 100.
2. Then we apply the code player.setav [skill name] 0(without brackets) - set the level of the specified skill to 0.
3. Repeat steps 1 and 2 until you have upgraded all the perks.

advskill destruction 999999
player.setav Destruction 0

After these manipulations, you will receive the required number of "ability points" and will be able to spend them on pumping all available in Skyrim perks.

To change the amount of magic, lives and stamina, use the following cheats:

• player.setav Health X- set max. number of lives in X units
• player.setav Magicka X- set max. amount of magic X units
• player.setav Stamina X- set max. amount of stock in X units.

Armor sets (sets)

Example: player.additem 00013938 1- get 1 glass boots

• 0001396B - armor
• 0001396A - boots
• 000D7A8C - fire suppression boots - +50% fire resistance.
• 000D7A8B - Boots of Silence - Silent movement.
• 000D7A8A - mammoth boots - +50 pts. load capacity.
• 0001396D - helmet
• 0001396C - gloves
• 0001396E - shield
• 000D7AF9 - grounding shield - + 70% resistance to electricity.
• 000D7AF6 - heat shield - + 70% cold resistance.
• 0010DFA3 - shield of denial - + 22% magic resistance.

• 00013965 - boots
• 00013966 - armor
• 00013967 - gloves
• 00013969 - helmet
• 00013968 - shield

• 0001393D - boots
• 0001393E - armor
• 0001393F - gloves
• 00013940 - helmet
• 00013941 - shield

• 0007C932 - "The Robe of the Archmage" (armor) - + 100% to the speed of magic recovery; all spells cost 15% less magicka
• 000F9904 - Scholar's Diadem (helmet) - All spells cost less magicka.
• 000FC5BF - Bloodlust Thrarch (Shield) - Hitting with a shield deals 3 damage. damage over 5 sec.
• 000E41D8 - "Shield of Ysgramor" - + 20% magic resistance; +20 pts health.
• 000295F3 - "Helmet of Yngol" - + 30% resistance to cold.

• 000С8911 - "Amulet of Akatosh" - + 25% to the speed of magic recovery
• 0002D773 - "Goldur's Amulet" - +30 units. magic, health and stamina. (added FANTOM)
• 00100E65 - "Necklace of immunity and diseases" - 100% immunity to diseases (added nikitadrakon)
• 000C891B - "Mary's Amulet" - Restoration spells cost 10% less magicka. Essential for a wedding.

• 00061CB9 - "Krosis" - + 20% to hacking, archery and alchemy skills
• 00061C8B - "Morokey" - + 100% to the speed of magic recovery
• 00061CA5 - "Nakrin" - spells of the school of destruction and restoration consume 20% less mana; +50 mana
• 00061CC9 - "Vokun" - spells of the school of illusion, change and witchcraft consume 20% less mana
• 00061CC2 - "Otar" - resistance to fire, electricity and cold increases
• 00061CC0 - Ragot - +70 stamina
• 00061CAB - Volsung - 20% discount on all products; breathing underwater; +70 load capacity
• 00061CC1 - "Khevnorak" - immunity to diseases and poisons
• 00061CCA - "Wooden Mask" (added by dova)
• 00061CD6 - "Konarik" - When health is low, gives a chance to heal the wearer and deal damage to nearby enemies. (added dova)

Weapon sets

Example: player.additem 000139A8 1- get 1 glass bow

Daedric Artifact IDs, which are below, must be used in the cheat code as follows:
(without brackets).

Example: player.additem 000240D2 1- get 1 dagger "Razor of Mehrunes"

Weapon

With a cheat code psb"we get all the spells, cries of dragons and talents ”or add only the necessary shouts using the cheat:

player.teachword- learn shout (list of all shout IDs below)
Example: player.teachword20e17- learn the first words of the shout "Fire Breath"

To learn the 3 word of the dragon's cry, you first need to learn 1 and 2, it will not work in another way. To learn "Iceform" level 3, you must enter the following:

player.teachword 602A3- first word
player.teachword 602A4- second
player.teachword 602A5- third

Dragon Shout IDs for code player.teachword(no brackets)
first word / second / third - the name of the cry(use only 1 of 3)

• 46B89 / 46B8A / 46B8B - Dragon's Call
• 13E22 / 13E23 / 13E24 - Unrelenting Force
• 602A3 / 602A4 / 602A5 - Ice mold
• 6029A / 6029B / 6029C - Thunder Call
• 20E17 / 20E18 / 20E19 - Fire Breath
• 48ACA / 48ACB / 48ACC - Time dilation
• 2F7BB / 2F7BC / 2F7BD - Swift Charge
• 60291 / 60292 / 60293 - Friendship with animals
• 3291D / 3291E / 3291F - Elemental Rage
• 32917 / 32918 / 32919 - Ethereal
• 5D16C / 5D16D / 5D16E - Frost Breath
• 602A0 / 602A1 / 602A2 - Voice cast
• 5FB95 / 5FB96 / 5FB97 - Disarmament
• 3CD31 / 3DC32 / 3CD33 - Clear Sky
• 51960 / 51961 / 51962 - Call of Valor
• 44251 / 44252 / 44253 - Dragonslayer
• 60297 / 60298 / 60299 - Death sentence
• 60294 / 60295 / 60296 - Aura Whisper
• 6029D / 6029E / 6029F - Kin World
• 3291A / 3291B / 3291C - Fright

Shouts DLC Dawnguard

• 02008A65 / 02008A64 / 02008A63 - Life Drain
• 020030D4 / 020030D6 / 020030D7 - Calling Durnevir
• 02007CB7 / 02007CB8 / 02007CB9 - Soul Rip
• 0201A162 / 0201A163 / 0201A164 - Call from Soul Cairn

Shouts DLC Dragonborn

• 040200E4 / 040200E5 / 040200E6 - Battle Fury
• 040179D9 / 040179DA / 040179DB - Submission of will
• 040200C2 / 040200C3 / 040200C4 - Cyclone
• 0401DF93 / 0401DF94 / 0401DF95 - Dragon Incarnation

player.modav dragonsouls N- get N soul of dragons. This cheat sets the total number of dragon souls consumed, and does not add N PC.

For activation of dragon cries press [ Tab] -- Magic -- screams-- select the necessary shout that you want to activate -- press [ R] -- Ok. Now you can use this shout.

player.setav shoutrecoverymult 0- Dragon Shouts have no cooldown, cooldown to reuse. If you entered this code after using cry, then it will be necessary to wait until it recovers, after which it will be possible to use this shout all the time without waiting for it to recover.

Ingredients, Soul Stones, Potions, Arrows

Example: player.additem 00039BE5 10- get 10 potions of full health restoration

• 00039BE5 - fully restores health
• 00039BE7 - fully restores magic
• 00039CF3 - fully restores stamina
• 00073F34 - "Deadly Poison" - 65 units. poison damage
• 00039D12 - Enchanter's Elixir
• 00039967 - "Blacksmith's Elixir"

• 0002E4F4 - large (empty)
• 0002E4FB - large (Large)
• 0002E4FC - great (empty)
• 0002E4FF - great (Great)
• 0002E500 - black (blank)
• 0002E504 - black (Great)
• 00063B27 - Star of Azura (blank)
• 00063B29 - Azura's Black Star (blank)

• 00038341 - Falmer
• 00034182 - ancient nordic
• 000236DD - dart (can only be obtained after completing the main storyline)
• 00020F02 - rusty iron
• 00020DDF - iron
• 000139C0 - Daedric
• 000139BF - ebonite
• 000139BE - glass
• 000139BD - elven
• 000139BC - Dwemer
• 000139BB - orcs
• 0001397F - steel

Treasure chests

Example: player.placeatme 000C2CDE- get a chest with all staves

• 000C2CDF - enchanted weapon
• 000C2CD7 - enchanted armor, jewelry, mage and rogue clothes
• 000C2CE0 - standard weapon
• 000C2CD6 - standard armor
• 000C2CDE - staves
• 000C2CD8 - armor and jewelry, clothes for a mage and a robber
• 0010D9FF - skill books
• 000C2CD9 - spell books
• 000C2D3B - regular books
• 000C2CD4 - arrows
• 000C2CDA - ingredients
• 000C2CDB - keys
• 000C2CE1 - spell scrolls
• 000C2CE2 - potions, elixirs and tinctures

• After opening some chests (with enchanted weapons and armor), Skyrim freezes for 30-60 seconds. (depending on the power of your CPU). Wait a while and everything will be fine.
• If, after opening a chest with an enchanted weapon/armor, instead of any one item, press [ R] (take all), then the duration of the freeze will be reduced several times.
• Chests contain all the items of their class - there are a lot of things.
• Each chest contains only 1 copy of each item. If you want to make a lot of such items (ingredients) - find out its ID of the item (read how to do it below) and create the required number of these things using the cheat player.additem ID number

Passage of quests

• showquesttargets- shows ID of active quest
• getstage(without brackets) - shows the stage of completion of the specified quest (the resulting number is not % completed).
• setstage [stage](without brackets) - set the stage of execution
• movetoqt(without brackets) - teleportation to the key point (the last unfinished stage) of the specified task. (added by Robin)
• sqs(without brackets) - show a list of all stages of the active quest (they are different for each quest). Used in cheat setstage.
• resetquest(without brackets) - reset all stages of the quest, after which it will be possible to go through it again. In order for this quest to be removed from the Quest Log, you must save and load the game.
• player.completequest(without brackets) - complete the quest. This command is not recommended., since you won't be able to get the next quest if it's a quest chain. Use only if you want to complete the quest without the possibility of further progress.

1. Save the game and do not overwrite this save until you complete the quest.
2. Open your task list (key [ J])
3. Select the required quest you want to complete and make it active - press [ Enter].
4. Open the console and enter showquesttargets- we get Quest ID.
5. In the resulting list, we are looking for Current quest: Quest ID -- remember/write down this ID.
6. Now we enter movetoqt quest ID and try to complete the quest in the usual way, without the console, and if nothing comes out, read on.
7. Enter in console getstage quest ID After that, the stage of completing this quest will appear in the console in the following form: GetStage >> [number].00 -- memorize / write down this number.Now we need to find out what stage of the quest comes after this one obtained using the command getstage.
8. Enter in console sqs(without brackets) - we get a list of all stages of the specified quest (for each quest they are different) in the following form Stage [stage]: 1(or 0). 1 - indicates that this stage has already been passed, and 0 - not yet.
9. In the resulting list, we are looking for our quest stage, obtained using the command getstage, and look at what stage comes after it - remember / write down the number. For example, if using getstage You received GetStage >> 400.00, and in the list obtained using the code sqs, after the line Stage 400: 1 there is a line Stage 450: 0- memorize / write down the number 450 .
10. Enter in console setstage [stage](without brackets) - set the stage of the quest. As a stage, we enter the number obtained in the previous paragraph (we have this 450 ), and as the quest ID - the ID obtained using the cheat showquesttargets.
11. Enter movetoqt(without brackets) - teleportation to the target of the active task.
12. We continue to pass the next stage of the quest.

• If nothing worked the first time, repeat the steps 9 And 10 several times, but change stage- enter the next in the list obtained using the command sqs(without brackets).
• If you repeat the points 9 And 10 , while changing stage quest (all in turn) from the one received using the command sqs(without brackets) to the last in the list sqs(without brackets), then you will complete all the stages of this quest and will move from one key point to another. The move will not always happen. That's how you can complete any quest 100%.
• It is not necessary to go exactly to the next stage of the quest, you can go directly to the last one, but in this case you may not receive the next quest, since you will not have an active quest or a point for teleportation by the command movetoqt- you won't know where to get it (next quest).
• If you go directly to the last stage, then you may not receive all the rewards for this quest (not tested).
• You cannot activate the previous stage of the quest (I did not succeed).

How to find out the name of a quest by its ID

Go to this page and enter the name of the quest in the appropriate search form.

Method 2- slow, but always works with any version of the game.

If after entering the command showquesttargets you have multiple lines Current quest: Quest ID and you do not know which of these IDs corresponds to this or that quest - do the following:

1. type in console help quest ID 4
2. in the resulting list look for the string QUST: quest ID (some ID) "Quest name"
3. repeat steps 1 and 2 until you find the quest you need by its name.

How to find the ID of an item

Method 1
In the console enter: player.showinventory

Note. This method always works, but if you have too many items in your inventory, it may be difficult to find the item you need. In such cases, use the second method.

Method 2(added Avenger)
We put the item whose ID you need to find out in an empty box (barrel, chest, bag or something else). We approach the box as close as possible (preferably sit down) - open the console - click on the box (in which our item lies) and enter the command inv.

Notes:

• This method may not always work, because when you click on a box with an item, the box itself is not always selected, very often it is not clear what is highlighted.
• If you can't find the item ID using this method, use the first method.
• With this method, you can see list of all other character's items. To do this, instead of clicking on the box, click on the required character.

To scroll through the text in the console, if there is a lot of it, use the [ Page Up] And [ Page Down].

We are looking for the necessary item by name and look Item ID
Now, to make a lot of such items (clone), we enter the following code:

player.additem [number](no brackets)

Housing

Example: player.placeatme 000BBCF1- install sky forge

• 000BAD0D - pentagram of souls (large)
• 000D5501 - pentagram of souls (small)
• 000BAD0C - alchemy laboratory (large)
• 000D54FF - alchemy laboratory (small)
• 000727A1 - leather tanning machine
• 0006E9C2 - whetstone
• 000BF9E1 - forge (large)
• 000BBCF1 - sky forge (very large)
• 0001A2AD - anvil
• 0009C6CE - smelter
• 000D932F - workbench

• 00089A85 - mannequin


• single door: CC16A, CC163
• CC164 - double door

decorative items

• B2456 - dragon head
• 3FA65 - elk antlers
• D9285 - crab
• D9276 - goat's head
• 3858F - fish
• moose head: DD9E0, DD9E1, CF264
• big cat head: D928F, D928D
• wolf head: D9289, D9288
• the head of some animal: D9287, D927D
• bear head: D8282, D9281, D927F


• carpets (square): 93D39, 93D3B, 93D3D, 93D3F, 93D41, 93D43, 93D45, 93D47, B7E3E, B7E40, BF9CF, BF9D1, BF9D3, BF9D5
• carpets (round): 95498, 954A3, 954A4, 954A5
• animal skins: 5C015, 5C016, 5C017


• 7EA42 - wall burning candles
• 1F24A - table candle
• 5AD5B - ceiling light


• 77761 - light source(invisible, cannot be selected/moved/deleted after installation) for illuminating dark rooms. To install multiple lights at the same time, use player.placeatme 77761N- install N light sources. Instead of N write any number from 1 before 10 . If you write more 10 - Nothing will happen.
• blue light source: FFF46, FFF48

• When created, all items appear in front of you.
• To set the item "flat" before introducing the cheat, center your gaze so that your character is looking straight ahead, not up or down.

For the following commands to work, you must first select the object - open the console and click on the object. After that, an inscription should appear in the middle of the console screen ""(Object ID). All the objects you create have an ID that starts with FF000..., so watch what you highlight.

Mannequin Codes

With the help of these cheat codes to Skyrim you can enchant (improve) any weapon, armor or jewelry. Before you begin the improvement process, you need to know the following:

• you can improve only the item that does not have any improvements;
• each item can have no more than 2 enchantments;
• the quality (strength) of enchantment depends on the Enchantment skill;
• before enchanting, it is recommended to upgrade the Enchantment skill to 100 along with its perks (read how to do this in the section “Leveling all skills and perks”);
• after entering the code for enchantment (improvement), the specified item will appear in your inventory, that is, a new item will be added, and the item in the inventory will not be improved;
• after enchanting (improving) a weapon, it will have a very small charge (170-350);
• to increase the charge, equip the necessary weapon whose charge you want to increase, and apply the following cheat codes:
  • player.setav LeftitemCharge N- load the weapon in the left hand on N charges
  • player.setav RightitemCharge N- load the weapon in the right hand on N charges
• list of ID of all items you can find

What are console commands for?

First of all, to get things.
Or just have fun.

The main list of cheat codes.

To open the console, press [~] (tilde) and enter the following cheat codes:
tgm - invulnerability mode
tcl - walk through walls
tmm 1 - open the world map (all points on the map)
killall - kill all (friends/enemies) in line of sight
psb - get all spells, dragon calls and talents
qqq - exit the game
advlevel - raise the level. Does not add ability points.
tfc - "free" camera mode
tdetect - theft without consequences. Turn off NPC vision. (added by Robin)
tcai - disables and enables artificial intelligence. Once cast, everyone stops fighting. (added by Robin)
set timescale to 0 - stop time. Default: 20. If you enter 10000 instead of 0, then one day will pass in a few seconds.

SexChange - change gender to the opposite. Your face won't change :)
Showracemenu - open the character creation window, where you can change: race, gender, appearance and name of the character. After changing the race, in early versions of the game, your character level will become 1. It will also reset all pumped skills. In version 1.3.10.0 of the game, after changing the race, the level of the character remains the same. Don't forget to save your game before applying this command command. (added by Robin)

player.setav invisibility 1 - enable invisibility. After that, neither enemies nor friends will notice you. To disable invisibility, enter 0 instead of 1.

player.modav carryweight X - Increase the character's maximum carry weight by X
player.setav speedmult X - set movement speed X%. Applied after running while holding down the key. Default: 100%.
player.setscale X - increase the height of your character, where X: 1 - 100%, 2 -200%, etc.
setgs fJumpHeightMin 100 - 100% jump height (default).

player.setav Stamina X - set max. amount of stamina in X units. If set to a high value, the character will not get tired while running.

player.setav attackdamagemult N - increase weapon damage by N times (added by Avenger)
player.setav leftweaponspeedmult N - increase the attack speed of the weapon in the left hand by N times
player.setav weaponspeedmult N - increase the attack speed of a weapon in the right hand and two-handed weapons by N times

player.setav LeftitemCharge N - Charge the weapon in the left hand by N units.
player.setav RightitemCharge N - Charge the weapon in the right hand by N units.
Notes:

All two-handed weapons count as right-handed weapons;
a fully loaded weapon has a charge level of about 3000;
each attack consumes about 30 units. weapon charge;
charge level can be set above 3000.

player.additem 0000000F N - get N gold
player.additem 0000000A N - get N lockpicks
player.placeatme 0010BF90 - Summon a Spectral Horse. Can be used indoors. (added Sam)

player.setcrimegold 0 - Remove the bounty on your head

player.addspell 00092C48 - Lycanthropy. Skill for turning into a wolf / werewolf. Appears in the "Talents" section. To activate use the [Z] key. You can't cancel the skin. The reverse transformation into a person will occur automatically, after a certain period of time.

Vampirism.

Player.addspell 000B8780 - vampirism. Adds the Sanguinare Vampiris disease. 3 days after infection, you have a 10% chance that you will become a vampire. If after 3 days after using this code in the section "Magic" - "Active Effects" appears "Vulnerability to fire" - you are a vampire. And if nothing happened - use the player.removespell 000B8780 command, after which again player.addspell 000B8780.
player.removespell 000B8780 - will be cured of vampirism, the disease "Sangvinare Vampiris", which appears at the first stage of transformation (after being bitten). After turning into a vampire, this code does not work.
setstage 000EAFD5 10 - recover from vampirism. Always heals, but only works 1 time as healing happens after the quest is completed (this code ends the quest). (added 216623)

If you became a vampire for the second time and the setstage code does not cure:

Save the game (new save, not quick save);
enter resetquest 000EAFD5
create another new save and load it;
enter setstage 000EAFD5 10

Teleportation.

Player.moveto (without brackets) - teleport to the specified object (character)
coc qasmoke - will move to the test location. There are all game items and devices for the manufacture of any items. (added by Robin)
coc riverwood - exit the test location, move to "Riverwood". If you enter another name instead of "riverwood", then a teleport to the specified location will occur. How to find out the names of locations for teleportation, read a little below. (added by Robin)
player.setpos [axis] [number] (without brackets) - move your character to the specified coordinates. Instead of an axis, you must specify x,y or z. And instead of a number - an offset along the selected axis.

Notes for player.setpos [axis] [number] (no brackets)

To find out your current location, type player.getpos [axis] (without parentheses). This command must be executed 3 times and instead of the axis, write x, y and z in turn. Then write down / remember all three received numbers.
If you know the exact coordinates to move, obtained earlier with the player.getpos [axis] command (without brackets), then use the player.setpos [axis] [number] command (without brackets) to move to the specified coordinates.
Do not close the console until you use the player.setpos [axis] [number] command (without brackets) 3 times for each of the coordinates (x,y,z).
The move only happens after the console is closed

How to find out the names of locations for the coc command.

There are a lot of different locations in the game and I will not lay out the exact commands for teleportation, but I will tell you how to find them. And so, what needs to be done to find out the very names of locations for the coc command:

Opening the console
enter help part_of_name_in_english 0 When entering the name of a location, there should be no spaces, and if they are, enter only the first word.
using the console scroll keys and find the following lines (there are many):
CELL: location_name (location id) (all of these can be entered for the coc command)
now that we already know the exact name for teleportation to the required location, enter coc location_name

player.removeallitems - Clear inventory. Removes ALL items in your inventory.

prid (without brackets) - select an object by its ID. An analogue to the following action: open the console - click on the object. After this command, the inscription "" (object ID) should appear in the console. After that, you can apply all the cheats written below without selecting the object. With this cheat code, you can select a very distant object and apply the necessary action to it. For example, resurrect someone or view the contents of the inventory

Skyrim codes (cheats) for selected objects.

In order for the following codes to work, you need to approach the creature (animal or character) or the required object from the front, open the console and click on it with the mouse, while the inscription "" (object_ID) should appear in the console. Then enter these cheats:

Stopcombat - stop combat with the specified friendly character.
Before applying this command, apply player.setcrimegold 0
If there are several enemy NPCs near you, then to stop the battle, you need to apply this cheat to everyone at once, without closing the console.
If at least one NPC attacks you (you did not apply this code to him), then all others will begin to attack.
If all else fails - take the attackers out of the city (before that, it is recommended to turn on the tgm invulnerability mode) - use the tcai command (so that everyone freezes and does not move anywhere) - take a comfortable position (so that everyone is in sight) - without closing the console apply the stopcombat command to everyone in turn. After the command has been applied to all characters, enter tcai and tgm again (if you enabled these modes).
All characters hostile to you are shown as red dots on the compass at the top and until these dots disappear they will attack you.
On constant enemies (monsters and story NPCs), those who always attack you, this command does not work.
kill - kill selected character/animal
resurrect 1 - resurrect
resetai - restore default dialogs - erase the memory of the selected NPC. This command must be used only if you killed someone, resurrected, and after that he refuses to talk to you.
openactorcontainer 1 - open the inventory of the selected creature. You can exchange items.
removeallitems - Clear the inventory of the specified character.
equipitem item_id - equip the selected character with the specified item (see item IDs below). With this cheat, you can dress any character, give him weapons and put on armor.
inv - show the contents of the inventory (list) of the selected object.
duplicateallitems player - Copy all items from the inventory of the specified NPC or object to your inventory.
resetinventory - reset the contents of the inventory. Dress the selected character in the default outfit, the original one.
setownership - get ownership of the specified item. (added by Robin)
unlock - open the lock of the specified object.
disable - hide the specified object.

Notes:

If you want to apply several commands to the same selected character or object, then you do not need to select it with the mouse each time, it is enough to select only 1 time (the selection is saved).
All the object IDs you created with the player.placeatme command start with FF...

Controlling other NPCs.

With the help of these cheats, you can take control of any monster or character. Do everything strictly in the specified sequence.

Switch to "third-person view" [F] (it won't work otherwise);
we approach the necessary character or monster;
open the console, click on it with the mouse and enter the following code;
TFC
player.TC
TC
TFC
close the console.

To return to the normal game and take control of your main character, enter in the console: TC and player.TC

Notes:

After gaining control over the NPC, you can only move with it and cannot attack.
If you press attack, then your main character will attack, and not the one under your control.
How to make NPCs attack is unknown. If you find a solution to this problem - write in the comments.

Companions (partners).

In Skyrim, almost any character can be made your partner, companion. To do this, do the following:

Approach the required character;
open the console and click on it (highlight);
enter setrelationshiprank player 3
enter addfac 0005C84D 1

After that, this character will have a dialogue: “Follow me. I need your help."

set playerfollowercount to 0 - Adds a dialog for taking new followers. After the introduction of this command, the old partners will continue to follow the player, but you can take another partner. As soon as you take someone else as your partner, the old partner stops following you. If no one is following you, there are no satellites, then this command is useless. The maximum number of partners is 1. It makes no sense to enter something else instead of 0 - it will not give any effect.

Strengthening skills.

All of the codes below increase a particular skill by (base value * N%). That is, if you have a base weapon damage of 15 units, and you entered 200 as a value, then the initial damage will be (15 + 15 * 2) = 45 units. To turn off the modifier, enter 0 as the value. The exact same formula is used to calculate the duration of spells.

Example: player.setav DestructionPowerMod 100 - increase the damage of all destruction spells by 100%

OneHandedPowerMod - one-handed weapon
TwoHandedPowerMod - two-handed weapon
MarksmanPowerMod - bows
BlockPowerMod - shield
SmithingPowerMod - blacksmithing
HeavyArmorPowerMod - heavy armor
LightArmorPowerMod - light armor
PickPocketPowerMod - Pickpocketing
LockpickingPowerMod - hack
SneakPowerMod - Stealth
AlchemyPowerMod - alchemy
SpeechcraftPowerMod - eloquence
AlterationPowerMod - change
ConjurationPowerMod - sorcery
DestructionPowerMod - destruction
IllusionPowerMod - illusion
RestorationPowerMod - restoration
EnchantingPowerMod - enchantment

Note. Changes to these modifiers are displayed in the description of spells and weapons.

We remove the squares when entering cheat codes.

We go into the game folder and find the following file: Skyrim\Data\Interface\fontconfig.txt. We replace the following line:

map "$ConsoleFont" = "Arial" Normal

map "$ConsoleFont" = "FuturaTCYLigCon" Normal

Note 1. If after that the fontconfig.txt file does not want to be saved or offers to save a copy of this file, then do the following:

In the properties of this file, see if the "Read Only" checkbox is checked;
if it's worth it, remove it, change the file, save it and check this box back.

Note 2. If for some reason you cannot remove the squares in the console, then enter the cheat codes as they are. In this case, you will not see what you enter, but the codes will work. However, before entering the codes, it is imperative to change the language in the console to English (instructions below).

Set the English language in the console.

Method 1 - setting the default English language in the OS (instruction).

Method 2 - Changing Game Files
Go to C:\Users\<имя_пользователя>\Documents\My Games\Skyrim and open the Skyrim.ini file. After the lines:

sLanguage=RUSSIAN

add (not replace) the following line

During the game, press the key combination +. Right click on your nickname, click change language and select EN.

This method will only work if you have the Steam version of the game.
After these steps, the language in the Skyrim console will be English instead of Russian.

Note 1. To set the English language in the console, you must follow the instructions described in one of the three methods presented.

Note 2. To set the English language in the console, use "Method 1", as it works for 90% of all players with the original version of the game. If you do not have the original version of the game or the first method did not change the language in the console, provided that you did everything correctly, try the other methods described here.

Once again, "Method 1" works almost always if you have everything in order with the game itself. If it does not work and you are the owner of a non-original version of the game, then you should think about finding another image with the game or purchase the original version.

Pumping all skills and perks.

With the help of these cheat codes for Skyrim, you can quickly upgrade all the skills and get all the perks. To do this, we need the following cheats:

Advskill N X - increase skill N by X experience points. The main team for pumping all skills and perks.
player.setav N X - set skill level X to N. This cheat does not add "ability points", but is required when your skill level reaches 100.
player.setlevel N - set character level N (1-255). Can be used to lower a character's level after using the advskill cheat.

List of all skill names for advskill and player.setav commands

Usage example:
advskill Destruction 100 - Increase "Destruction" by 100 experience (not levels)
player.setav Block 50 - set skill level 50 "Block"

Alchemy - alchemy
Alteration - change
Conjuration - sorcery
Destruction - destruction
Enchanting - enchantment
Illusion - illusion
Restoration - restoration
Marksman - Shooting
Block - block
HeavyArmor - heavy armor
LightArmor - light armor
Lockpicking - Hacking
Onehanded - one-handed weapon
Twohanded - two-handed weapon
Pickpocket - pickpocketing
Smithing - blacksmithing
Sneak - stealth
Speechcraft - eloquence

To pump all the perks of all skills, do the following (added by dova):

With the help of the advskill cheat (description above), we raise any skill to level 100.
Then apply the code player.setav [skill name] 0 (without brackets) - set the level of the specified skill to 0.
Repeat steps 1 and 2 until you have upgraded all the perks.

If after that you still don’t understand how to add “ability points” to level up perks, then enter this several times (in turn):

advskill destruction 999999
player.setav Destruction 0

After these manipulations, you will receive the required number of "ability points" and will be able to spend them on pumping all the perks available in Skyrim.

Fast leveling of all perks in Skyrim and raising all skills to 100.

To raise the level of your main character, enter: player.setlevel 50 - set the level of the main character to 50. Instead of 50, you can enter any number.

To change the amount of magic, lives and stamina, use the following cheats:

Player.setav Health X - set max. number of lives in X units
player.setav Magicka X - set max. amount of magic in X units
player.setav Stamina X - set max. stock quantity in X units.

Armor sets (sets).

To get the necessary set of armor, enter the cheat codes in the following form:
player.additem [armor_code] [amount] (no brackets).

Example: player.additem 00013938 1 - get 1 glass boots

0001396B - armor
0001396A - boots
000D7A8C - fire suppression boots - +50% fire resistance.
000D7A8B - Boots of Silence - Silent movement.
000D7A8A - mammoth boots - +50 pts. load capacity.
0001396D - helmet
0001396C - gloves
0001396E - shield
000D7AF9 - grounding shield - + 70% resistance to electricity.
000D7AF6 - heat shield - + 70% cold resistance.
0010DFA3 - shield of denial - + 22% magic resistance.

Draconic Shell Armor Set

00013965 - boots
00013966 - armor
00013967 - gloves
00013969 - helmet
00013968 - shield

Draconic Scale Armor Set

0001393D - boots
0001393E - armor
0001393F - gloves
00013940 - helmet
00013941 - shield

0007C932 - "The Robe of the Archmage" (armor) - + 100% to the speed of magic recovery; all spells cost 15% less magicka
000F9904 - Scholar's Diadem (helmet) - All spells cost less magicka.
000FC5BF - Bloodlust Thrarch (Shield) - Hitting with a shield deals 3 damage. damage over 5 sec.
000E41D8 - "Shield of Ysgramor" - + 20% magic resistance; +20 pts health.
000295F3 - "Helmet of Yngol" - + 30% resistance to cold.

Accessories with bonuses

000С8911 - "Amulet of Akatosh" - + 25% to the speed of magic recovery
0002D773 - "Goldur's Amulet" - +30 units. magic, health and stamina. (added FANTOM)
00100E65 - "Necklace of immunity and diseases" - 100% immunity to diseases (added nikitadrakon)
000C891B - "Mary's Amulet" - Restoration spells cost 10% less magicka. Essential for a wedding.

Masks (helmets) with bonuses

00061CB9 - "Krosis" - + 20% to hacking, archery and alchemy skills
00061C8B - "Morokey" - + 100% to the speed of magic recovery
00061CA5 - "Nakrin" - spells of the school of destruction and restoration consume 20% less mana; +50 mana
00061CC9 - "Vokun" - spells of the school of illusion, change and witchcraft consume 20% less mana
00061CC2 - "Otar" - resistance to fire, electricity and cold increases
00061CC0 - Ragot - +70 stamina
00061CAB - Volsung - 20% discount on all products; breathing underwater; +70 load capacity
00061CC1 - "Khevnorak" - immunity to diseases and poisons
00061CCA - "Wooden Mask" (added by dova)
00061CD6 - "Konarik" - When health is low, gives a chance to heal the wearer and deal damage to nearby enemies. (added dova)

Weapon sets.

To get the necessary weapon, enter the cheat codes in the following form:
player.additem [weapon_code] [amount] (no parentheses).

Example: player.additem 000139A8 1 - get 1 glass bow

000139B4 - ax
0001DDFB - inferno ax - +30 units. fire damage; sets fire to the target.
0001DFCB - ax of thunderstorms - +30 pts. electrical damage; takes 15 units. of magic.
000139B5 - bow
0001DFEF - Bow of Petrification - Chance to paralyze the target for 6 sec.
0001DFE6 - Inferno bow - +30 pts. fire damage; sets fire to the target.
0001DFE9 - winter bow - +30 pts. cold damage; takes 30 units. reserve of strength.
0001DFF2 - bow of storms - +30 pts. electrical damage; takes 15 units. of magic.
0001DFFC - Sacred Bow - Undead level 40 and below flee for 30 sec.
000139B6 - dagger
000139B7 - two-handed sword
000139B8 - mace
000139B9 - sword
000139B3 - battle ax
000139BA - war hammer

000F1AC1 - "Dragon Scourge" - +40 units. damage to dragons and +10 HP. electricity damage against everyone. (added by zalex2004)
000F5D2D - "Pale Blade" - +25 units. cold damage; subtract 50 stamina from the target; weaker creatures and humans flee for 30 seconds.
000956B5 - "Vuutrad" - Especially deadly against elves.
000B3DFA - "Crayon's Eye" - A fiery explosion deals 40 damage. damage in a 4.5m radius and sets targets on fire.
000A4DCE - "Bloody Thorn" - Fills a soul gem if the enemy dies within 3 seconds.
00053379 - "Fierce" - +15 units. cold damage; takes 15 units. the enemy's reserve of forces.
000F8317 - "Cooler" - +30 units. cold damage; chance to paralyze the target for 2 sec.
0001C4E6 - Ax of Sorrow - Subtracts 20 damage. the enemy's reserve of forces.
00035369 - "Staff of Magnus" - Absorbs 20 damage. magic per second, if the enemy has no magic, it absorbs its health.
0010076D - "Staff of Hevnorak" - For 30 sec. deals 50 damage. lightning damage per second. Applied to the surface.
000AB704 - "Staff of Holdir" - Calms weak enemies for 60 sec. or captures their souls if they die.
000E5F43 - "Staff of Jurik Goldurson" - inflicts 25 damage. damage and takes 50 damage. of magic.
00094A2B - "Phantom Blade" - +3 units. additional damage, ignoring armor.
000AB703 - "Curse of the Red Eagle" - Sets undead level 13 and below on fire, and turns them to flight for 30 seconds.
0009FD50 - "Rage of the Red Eagle" - +5 units. fire damage and sets the target on fire.
000B994E - Valdar's Lucky Dagger - +25% critical hit chance.
0006A093 - "Staff of Tandil" (staff) - Creatures and people of level 12 and below do not fight for 60 seconds. (added by Robin)

Notes:

Additional weapon damage was indicated for a first-level character without upgraded skills.
All descriptions and names were taken from the game. "Yurik Goldurson's Staff" - that's what it is called in the game, not "Yurik". Perhaps this is a localization error.
Only the latest (most powerful) weapon versions were added.

Daedric artifacts.

The Daedric Artifact IDs below must be used in the cheat code as follows:

Example: player.additem 000240D2 1 - get 1 dagger "Mehrunes' Razor"

000240D2 - "Mehrunes Razor" (dagger) - Chance to kill the enemy when dealing damage.
000233E3 - "Mace of Molag Bal" (mace) - Subtracts 25 damage. stamina and magic. Fills a soul gem if an enemy dies within 3 seconds.
0004E4EE - "Shine of Dawn" (sword) - +10 units. damage. When killing undead, there is a chance of a fiery explosion that drives away or destroys nearby undead.
000EA29C - "Ebony Blade" (two-handed sword) - The target does not perceive a weapon attack as an attack.
0001C4E6 - "Ax of Sorrow" (two-handed ax) - Subtracts 20 points. the enemy's reserve of forces.
0002ACD2 - "Volendrang" (two-handed hammer) - Subtracts 50 units. reserve of strength.
0002AC6F - "Wabbajack" (staff) - Random effect on each use.
0001CB36 - Sanguine Rose (staff) - Summons a Dremora for 60 seconds.
00035066 - Skull of Corruption (staff) - +20 pts. damage. Dreams gathered from sleeping humans increase damage to 50.

0002AC61 - "Skin of the Savior" (light armor) - + 50% resistance to poisons and + 15% magic.
00052794 - "Ebony Mail" (heavy armor) - You move more quietly, and enemies who get too close take 5 points of poison damage per second.
000D2846 - "Mask of Clavicus Vile" (heavy helmet) - +10 to eloquence. Magicka recovery rate +5%. Favorable prices +20%.
00045F96 - "Spell Breaker" (shield) - After blocking, absorbs up to 50 damage. spell damage.

0002C37B - "Ring of Namira" - +50 units. reserve of strength. Consuming corpses increases your health and regeneration rate.
0002AC60 - "Ring of Hircine" - Additional transformation for werewolves.
0001A332 - "Ogma Infinum" (book) - After reading, you can get +5 to the following skills (only 1 of 3 lines is randomly selected):
Blacksmithing, Blocking, Marksmanship, One-Handed Weapons, Two-Handed Weapons, Heavy Armor;
Lockpicking, Light Armor, Stealth, Pickpocketing, Speech, Alchemy;
Illusion, Sorcery, Destruction, Restoration, Enchantment, Change.
00063B27 - Azura's Star - Infinite Soul Gem.
00063B29 - "Black Star" - Soul Stone.
0003A070 - "Skeleton Key" - Infinite master key. A bug was found in earlier versions of the game. If the version of Skyrim is lower than 1.3.10.0, then in order to use the Skeleton Key, you must have at least 1 regular lockpick in your inventory. After the first unsuccessful attempt to open the lock, all ordinary master keys disappear, but after that, in order to open a lock, ordinary master keys are not needed. This bug has been fixed in the latest version of the game.

Dragon Shouts are the most powerful spells in Skyrim.

Using the psb cheat code "get all spells, dragon screams and talents" or add only the necessary screams using the cheat:

player.teachword - learn a shout (list of all shout IDs below)
Example: player.teachword 20e17 - learn the first word of the Fire Breath shout

To learn the 3 word of the dragon's cry, you first need to learn 1 and 2, it will not work in another way. To learn "Iceform" level 3, you must enter the following:

player.teachword 602A3 - first word
player.teachword 602A4 - second
player.teachword 602A5 - third

Dragon shout IDs for the player.teachword code (no parentheses)
first word / second / third - the name of the shout (use only 1 of 3)

46B89 / 46B8A / 46B8B - Dragon's Call
13E22 / 13E23 / 13E24 - Unrelenting Force
602A3 / 602A4 / 602A5 - Ice mold
6029A / 6029B / 6029C - Thunder Call
20E17 / 20E18 / 20E19 - Fire Breath
48ACA / 48ACB / 48ACC - Time dilation
2F7BB / 2F7BC / 2F7BD - Swift Charge
60291 / 60292 / 60293 - Friendship with animals
3291D / 3291E / 3291F - Elemental Rage
32917 / 32918 / 32919 - Ethereal
5D16C / 5D16D / 5D16E - Frost Breath
602A0 / 602A1 / 602A2 - Voice cast
5FB95 / 5FB96 / 5FB97 - Disarmament
3CD31 / 3DC32 / 3CD33 - Clear Sky
51960 / 51961 / 51962 - Call of Valor
44251 / 44252 / 44253 - Dragonslayer
60297 / 60298 / 60299 - Death sentence
60294 / 60295 / 60296 - Aura Whisper
6029D / 6029E / 6029F - Kin World
3291A / 3291B / 3291C - Fright

Shouts DLC Dawnguard.

02008A65 / 02008A64 / 02008A63 - Life Drain
020030D4 / 020030D6 / 020030D7 - Calling Durnevir
02007CB7 / 02007CB8 / 02007CB9 - Soul Rip
0201A162 / 0201A163 / 0201A164 - Call from Soul Cairn

Shouts DLC Dragonborn.

040200E4 / 040200E5 / 040200E6 - Battle Fury
040179D9 / 040179DA / 040179DB - Submission of will
040200C2 / 040200C3 / 040200C4 - Cyclone
0401DF93 / 0401DF94 / 0401DF95 - Dragon Incarnation

To use Dragon Shouts, you first need to activate them with the help of Dragon Souls. That is, kill the dragon or add the required amount using the cheat:

player.modav dragonsouls N - Get N dragon souls. This cheat sets the total number of absorbed dragon souls, and does not add N pcs.

To activate dragon cries, press - Magic - Shouts - select the desired cry that you want to activate - press [R] - Ok. Now you can use this shout.

player.setav shoutrecoverymult 0 - dragon shouts have no cooldown, cooldown to reuse. If you entered this code after using the shout, you will need to wait until it is restored, after which it will be possible to use this shout all the time without waiting for it to be restored.

Ingredients, Soul Stones, Potions, Arrows.

To get the required item, whose IDs are below, you must use the cheat code in the following form:
player.additem [amount] (without brackets).

Example: player.additem 00039BE5 10 - get 10 full health potions

00039BE5 - fully restores health
00039BE7 - fully restores magic
00039CF3 - fully restores stamina
00073F34 - "Deadly Poison" - 65 units. poison damage
00039D12 - Enchanter's Elixir
00039967 - "Blacksmith's Elixir"

Soul Stones

0002E4F4 - large (empty)
0002E4FB - large (Large)
0002E4FC - great (empty)
0002E4FF - great (Great)
0002E500 - black (blank)
0002E504 - black (Great)
00063B27 - Star of Azura (blank)
00063B29 - Azura's Black Star (blank)

00038341 - Falmer
00034182 - ancient nordic
000236DD - dart (can only be obtained after completing the main storyline)
00020F02 - rusty iron
00020DDF - iron
000139C0 - Daedric
000139BF - ebonite
000139BE - glass
000139BD - elven
000139BC - Dwemer
000139BB - orcs
0001397F - steel

Treasure chests.

Each of the chests contains all the items of its class. For example, a stave chest contains ALL staves, while an ingredient chest contains ALL ingredients. To get these treasure chests, use the following cheat codes for Skyrim:
player.placeatme (no brackets)

Example: player.placeatme 000C2CDE - get a chest with all staves

000C2CDF - enchanted weapon
000C2CD7 - enchanted armor, jewelry, mage and rogue clothes
000C2CE0 - standard weapon
000C2CD6 - standard armor
000C2CDE - staves
000C2CD8 - armor and jewelry, clothes for a mage and a robber
0010D9FF - skill books
000C2CD9 - spell books
000C2D3B - regular books
000C2CD4 - arrows
000C2CDA - ingredients
000C2CDB - keys
000C2CE1 - spell scrolls
000C2CE2 - potions, elixirs and tinctures

Notes:

After opening some chests (with enchanted weapons and armor), Skyrim freezes for 30-60 seconds. (depending on the power of your CPU). Wait a while and everything will be fine.
If, after opening a chest with an enchanted weapon/armor, instead of a single item, press [R] (take all), then the duration of the freeze will be reduced by several times.
Chests contain all the items of their class - there are a lot of things.
Each chest contains only 1 copy of each item. If you want to make a lot of such items (ingredients) - find out its ID of the item (read how to do it below) and create the required number of these things using the cheat player.additem ID quantity

Passing quests.

To complete quests in Skyrim, we need the following cheat codes:

Showquesttargets - shows the ID of the active quest
getstage (without brackets) - shows the stage of the specified quest (the resulting number is not % completed).
setstage [stage] (without brackets) - set the stage of execution
movetoqt (without brackets) - teleport to the key point (the last unfinished stage) of the specified task. (added by Robin)
sqs (without brackets) - show a list of all stages of the active quest (they are different for each quest). Used in the setstage cheat.
resetquest (without brackets) - reset all stages of the quest, after which it can be completed again. In order for this quest to be removed from the Quest Log, you must save and load the game.
player.completequest (no parentheses) - complete the quest. This command is not recommended as you won't be able to get the next quest if it's a quest chain. Use only if you want to complete the quest without the possibility of further progress.

And so, we already know all the necessary console commands for the successful completion of quests in Skyrim, but what and why to enter is not. Since we will perform all actions in the console, I want to remind you that to scroll the text in the console, you must use the and keys. The method written below describes how to move from one stage of the quest to another.

Save the game and don't overwrite this save until you complete the quest.
Open your quest list ([J] key)
Select the required quest you want to complete and make it active - press .
Open the console and enter showquesttargets - get the quest ID.
In the resulting list, look for Current quest: Quest ID - remember / write down this ID.
Now we enter the movetoqt quest ID and try to complete the quest in the usual way, without the console, and if nothing comes out, read on.
Enter in the console getstage ID_quest. After that, the stage of this quest will appear in the console in the following form: GetStage >> [number].00 -- remember / write down this number. Now we need to find out which stage of the quest comes after this, obtained using the getstage command .
We enter in the console sqs (without brackets) - we get a list of all stages of the specified quest (for each quest they are different) in the following form Stage [stage]: 1 (or 0). 1 - indicates that this stage has already been passed, and 0 - not yet.
In the resulting list, we are looking for our quest stage, obtained using the getstage command, and see what stage comes after it - remember / write down the number. For example, if using getstage you received GetStage >> 400.00, and in the list obtained using the sqs code, after the line Stage 400: 1, there is the line Stage 450: 0 - remember / write down the number 450.
Enter in the console setstage [stage] (without brackets) - set the stage of the quest. As a stage, we enter the number obtained in the previous paragraph (we have 450), and as the quest ID - the ID obtained using the showquesttargets cheat.
Enter movetoqt (without brackets) - teleportation to the target of the active task.
We continue to pass the next stage of the quest.

Notes:

If nothing worked the first time - repeat steps 9 and 10 several times, but at the same time change the stage - enter the next one in the list obtained using the sqs command (without brackets).
If you repeat steps 9 and 10, while changing the stage of the quest (all in turn) from the one obtained using the sqs command (without brackets) to the last one in the sqs list (without brackets), then you will complete all stages of this quest and will move from one key points to another. The move will not always happen. This is how you can complete any quest 100%.
It is not necessary to go exactly to the next stage of the quest, you can go directly to the last one, but in this case you may not receive the next quest, since you will not have an active quest or point for teleportation with the movetoqt command - you will not know where to get it ( next quest).
If you go directly to the last stage, then you may not receive all the rewards for this quest (not tested).
You cannot activate the previous stage of the quest (I did not succeed).

How to find out the name of a quest by its ID.

Method 1 is the fastest, but may not work if you have some mods or unofficial add-ons installed.

Go to this page and enter the name of the quest in the appropriate search form.

Method 2 is slow, but it always works with any version of the game.

If, after entering the showquesttargets command, you get several lines of Current quest: quest ID and you do not know which of these IDs corresponds to a particular quest, do the following:

Enter in the console help ID_quest 4
in the resulting list, look for the line QUST: quest ID (some ID) "Quest name"
repeat steps 1 and 2 until you find the quest you need by its name.

Quest IDs, after the introduction of showquesttargets, are in exactly the same sequence as in the Quest Log. That is, if in the "Journal of tasks" at the very top of the list you have the quest "It's restless in Skyrim", and after it comes "Cleaning", then they will be in exactly the same sequence after the introduction of the showquesttargets command. This will help make it even faster to sort through all the quest IDs, since you will approximately know which ID to start searching for the quest you need.

How to find the ID of an item.

If you have some unique item and want to make a lot of such items (clone) or want to "send" this item to your friend, but don't know how to do it. To do this, we need to know the ID of this item.

Method 1
In the console, enter: player.showinventory

Note. This method always works, but if you have too many items in your inventory, it may be difficult to find the item you need. In such cases, use the second method.

Method 2 (added Avenger)
We put the item whose ID you need to find out in an empty box (barrel, chest, bag or something else). We approach the box as close as possible (preferably sit down) - open the console - click on the box (in which our item lies) and enter the inv command.

Notes:

This method may not always work, because when you click on a box with an item, the box itself is not always selected, very often it is not clear what is highlighted.
If you can't find the item ID using this method, use the first method.
With this method, you can see a list of all the items of another character. To do this, instead of clicking on the box, click on the required character.

After that, a list of all items in your inventory or box (if you entered the inv command) will appear in the following form:
quantity - name (item ID)

To scroll through the text in the console, if there is a lot of it, use the and keys.

We are looking for the necessary item by name and look at the ID of the item
Now, to make a lot of such items (clone), we enter the following code:

player.additem [amount] (no brackets)

Housing.

Many of you have your own home or a place where you like to spend time, but when you need to create some thing (armor, weapon), improve something or create a new elixir, you have to look for special devices to create it, because without no way. With the help of these codes for Skyrim, you can create your own workplace, install all the devices you need, anywhere and anytime. To install all of these crafting workbenches, use the following code for Skyrim:
player.placeatme (no brackets) - place an item

Example: player.placeatme 000BBCF1 - install sky forge

000BAD0D - pentagram of souls (large)
000D5501 - pentagram of souls (small)
000BAD0C - alchemy laboratory (large)
000D54FF - alchemy laboratory (small)
000727A1 - leather tanning machine
0006E9C2 - whetstone
000BF9E1 - forge (large)
000BBCF1 - sky forge (very large)
0001A2AD - anvil
0009C6CE - smelter
000D932F - workbench

Furniture for home

00089A85 - mannequin

Single door: CC16A, CC163
CC164 - double door

decorative items

B2456 - dragon head
3FA65 - elk antlers
D9285 - crab
D9276 - goat's head
3858F - fish
moose head: DD9E0, DD9E1, CF264
big cat head: D928F, D928D
wolf head: D9289, D9288
the head of some animal: D9287, D927D
bear head: D8282, D9281, D927F

Carpets (square): 93D39, 93D3B, 93D3D, 93D3F, 93D41, 93D43, 93D45, 93D47, B7E3E, B7E40, BF9CF, BF9D1, BF9D3, BF9D5
carpets (round): 95498, 954A3, 954A4, 954A5
animal skins: 5C015, 5C016, 5C017

7EA42 - wall burning candles
1F24A - table candle
5AD5B - ceiling light

77761 - light source (invisible, cannot be selected/moved/deleted after installation) for illuminating dark rooms. To set multiple lights at the same time, use player.placeatme 77761 N - set N lights. Instead of N, write any number from 1 to 10. If you write more than 10, nothing will happen.
blue light source: FFF46, FFF48

Notes:

When created, all items appear in front of you.
To set the item "flat" before introducing the cheat, center your gaze so that your character is looking straight ahead, not up or down.

activate (without brackets) - activate the specified item. Analog key [E]. Applies to mannequins (dress) and bookshelves (close/open).

For the following commands to work, you must first select the object - open the console and click on the object. After that, the inscription "" (object ID) should appear in the middle of the console screen. All the objects you create have an ID that starts with FF000..., so watch what you highlight.

Mannequin Codes

Tai - enable/disable the artificial intelligence of the selected character (dummy). The character (dummy) will freeze and will not move.
OpenActorContainer 1 - open the mannequin's inventory.
ResetReference - clear the inventory (delete all items) of the mannequin/NPC and set the initial stance. Before using this command, it is recommended to apply tai to this object.

Cheats for all objects in Skyrim

Getpos [axis] (without brackets) - get the current coordinates of the selected object. Instead of [axis], you must specify x,y or z.
Setpos [axis] [number] (without brackets) - set coordinates for the object.
Getangle [axis] (without brackets) - get the rotation angle relative to the specified coordinate axis.
Setangle [axis] [number] (without brackets) - set the rotation angle for the specified object
Setscale [number] (no brackets) - set the scale of the specified object. 1- 100%, 2- 200%, etc. Default: 1 - 100%.
moveto player - move the object towards you.

Disable - hide the specified object.
enable - show the object that was hidden with the disable cheat.
markfordelete - delete the selected object or character. Attention! With this code, you can remove not only some kind of chest, but also invisible objects that can be selected with the mouse and which are necessary for the normal functioning of the game. Be careful when using this command. Objects created by you are deleted immediately, and others - after saving and loading the game. There are no reverse commands. It is not recommended to use this command, as you may remove a wall, floor, or entire building. It is recommended to use the disable command to remove items as it only hides the item and does not remove the object.

Notes:

To apply several commands to the same object, you do not need to select it again each time, the selection is saved.
Using the Setpos and Getangle commands, you can move and rotate an object only visually, physically it remains in the place where it was originally created, that is, after entering the placeatme command. If an item is moved too far from its original location, you will be able to walk through it and be unable to interact with it.
To set the item straight, align it, enter:
setangle x 0
Setangle y 0
To rotate the item, use Setangle z [number] (no brackets).
In order for these changes to be applied after the commands for moving (Setpos) and rotating the object (Setangle), enter Setscale 1. When moving and rotating, some objects have such a bug.
So that after the rotation (Setangle) and moving (Setpos) commands, the object moves not only visually, but also physically, enter disable and enable in the console. After that, the selected object will physically move and it will not be possible to pass through it.

Enchanting (improving) weapons and armor.

With the help of these cheat codes for Skyrim, you can enchant (improve) any weapon, armor or jewelry. Before you begin the improvement process, you need to know the following:

You can only improve the item that does not have any improvements;
each item can have no more than 2 enchantments;
the quality (strength) of enchantment depends on the Enchantment skill;
before enchanting, it is recommended to upgrade the Enchantment skill to 100 along with its perks (read how to do this in the section “Leveling all skills and perks”);
after entering the code for enchantment (improvement), the specified item will appear in your inventory, that is, a new item will be added, and the item in the inventory will not be improved;
after enchanting (improving) a weapon, it will have a very small charge (170-350);
to increase the charge, equip the necessary weapon whose charge you want to increase, and apply the following cheat codes:
player.setav LeftitemCharge N - charge the weapon in the left hand for N charges
player.setav RightitemCharge N - charge the weapon in the right hand for N charges
You can find a list of IDs for all items here.

PlayerEnchantObject Item ID Enchant ID 1 Enchant ID 2 - get an item with the specified enchantments (improvements). The ID of the second enchantment is optional.

Example: PlayerEnchantObject 000136D5 000493AA 0007A0F8 - get "Imperial Armor" (000136D5) with enchantments to increase the number of lives (000493AA) and their regeneration speed (0007A0F8).

Skill Up
0008B65C - alchemy
0007A0FE - shooting
0007A104 - trade
0007A0F3 - block
0007A0F9 - heavy armor
0007A0FB - light armor
0007A0FC - hacking
0007A0FF - one-handed weapon
0007A106 - two-handed weapon
0007A100 - pickpocketing
0007A102 - blacksmithing
0007A103 - stealth

Raise
00049504 - magic
000493AA - health
00049507 - stamina

Regeneration
0007A0FD - mana
0007A0F8 - health
0007A105 - stamina

Resistance
00048C8B - fire
00048F45 - cold
00100E60 - diseases
000B7A35 - all magic
000FF15E - poison
00049295 - electricity

School Magic Cost Reduction
00109634 - recovery
00109633 - illusions
00109631 - destruction
0010962F - sorcery
0010962E - changes

Other
0007A0F4 - carrying weight
000424E2 - damage without weapons
00092A57 - silent movement
00092A48 - underwater breathing
0010E809 - all spells cost 3% less magicka
0008850D - Shout cooldown reduced by 20%
000F82FF - additional transformation into a werewolf
00017120 - armor upgrade
000FF15C - 2x damage for sneak attacks with one-handed weapons

Damage
0004605A - fire
0004605B - ​​cold
0004605C - electricity
0010582E - nordam
00105831 - animals
000FEFBC - "Light of Meridia" - Burns the target for N units, and when killing the undead, gives a chance of a fiery explosion that destroys or drives away undead nearby.

Absorption
000AA155 - health
000AA156 - magic
000AA157 - stamina

Takes away
0005B44F - magic
0005B450 - stamina

Other
0003B0B1 - "Silent Moon" (additional damage at night)
000ACBB5 - banishment of the Daedra
0001EA77 - fear
0005B46B - scaring away the undead
0001EA6E - paralysis
0004DBA3 - soul capture
001019D6 - Increases Blacksmithing and deals electricity damage
0002C593 - "Elemental Fury" - increases attack speed

Legendary weapons and armor.

Many have probably heard about the legendary armor and weapons, but not everyone knows how to get it. In fact, everything is quite simple and getting these items in Skyrim is not difficult, but first you need to tell what it is. Legendary weapons and armor are still the same items, but with significantly improved performance. The percentage of improvement directly depends on the level of the Blacksmithing skill and the higher it is, the better the characteristics of the legendary armor or legendary weapons after the improvement. You can improve weapons and armor at any level of blacksmithing, but in order for this item to be marked "Legendary" after upgrading, you must increase the level of blacksmithing to 91 and above. And so, what is needed to upgrade weapons and armor to legendary quality:

Ordinary armor or weapons;
ingredients for improvement (different for all things);
blacksmithing level 91+
Workbench.

All these things in Skyrim can be obtained in the usual way, but it will take a long time. Let's move on to creating improved weapons and armor using cheat codes and a game console:

Opening the console;
player.setav Smithing 100 - upgrade Blacksmithing to level 100;
player.placeatme 000D932F - create a workbench;
go to this page, look for the armor or weapon you are interested in and add it to your inventory using the player.additem ID quantity command;
we approach the workbench in the game and see what ingredients are needed for improvement;
go to this page, look for the ingredient you need to improve and add it to your inventory using the player.additem ID quantity command;
we improve the item on the workbench.

That's all. You now have armor or weapons of legendary quality.

Notes:

There is no single cheat code for obtaining armor and weapons of legendary quality in Skyrim - this is the fastest method;
if you pump "Blacksmithing" above 100, then you will get even more powerful things;
all of the enhancement ingredients listed above are in the "ingredients" or "other" group.

Conclusion.

Codes (cheats) for the game Skyrim work, 90% of players think so.
Good luck;)