How to make art from photos: make art photographs in Photoshop. Photo in Pop-art style

Photoshop is truly a wonderful tool in your hands. knowledgeable person. With its help you can change so much original image that it will turn into an independent work.

If you are haunted by the fame of Andy Warhol, then this lesson is for you. Today we’ll make a portrait in pop art style from an ordinary photo using filters and adjustment layers.

Almost any images are suitable for processing. It's difficult to imagine in advance how filters will work, so choosing the right photo can take quite a long time.

The first step (preparatory) is to separate the model from white background. How to do this, read the article at the link below.

Posterization

1. Remove visibility from the background layer and desaturate the cut out model using a keyboard shortcut CTRL+SHIFT+U. Don't forget to switch to the appropriate layer.

   

2. In our case, the shadows and highlights are not very well expressed in the image, so we press the key combination CTRL+L, calling "Levels". Move the outer sliders to the center, increasing the contrast, and click OK.

   

3. Go to the menu "Filter - Simulate - Outlined Edges".

   

4. "Edge thickness" And "Intensity" we remove it to zero, and "Posterization" give the value 2.

   

   The result should be approximately the same as in the example:

   

5. The next step is posterization. Create a corresponding adjustment layer.

   

6. Drag the slider to the value 3 . This setting can be individual for each image, but in most cases, three is suitable. Look at the result.

   

7. Create a merged copy of layers using a keyboard shortcut CTRL+ALT+SHIFT+E.
8. Next we take the tool "Brush".

   

9. We need to paint over the extra areas in the image. The algorithm is as follows: if we want to remove black or gray dots from white areas, then press and hold ALT, taking a color sample (white) and painting; if we want to clean grey colour, do the same on the gray area; with black areas everything is the same.

   

10. Create a new layer in the palette and drag it under the portrait layer.

    

11. Fill the layer with the same gray as in the portrait.

    

Posterization is complete, let's move on to toning.

Toning

To add color to the portrait we will use an adjustment layer "Gradient Map". Don't forget that the adjustment layer should be at the very top of the palette.

To color the portrait, we need a three-color gradient.

After selecting the gradient, click on the window with the sample.

The color is adjusted as follows: double-click on the point and select a color.

Thus, by adjusting the colors for the control points, we achieve the desired result.

This concludes the lesson on creating a portrait in pop art style in Photoshop. In this way you can create great amount color options and place them on the poster.

A portrait in pop art style will be the most original and an unexpected gift for your friend, relative or loved one. The service of creating custom-made such modern works art. IN modern interiors Pop art portraits of celebrities look great, they enliven the atmosphere, make it bright, impressive, and therefore this service is relevant. In this regard, many Internet users are interested in the question, is it possible to do this with your own hands?

How to make a pop art portrait with your own hands

You can do this yourself in the program Adobe Photoshop, professional Photoshop lessons, which are accessible even to a beginner, will help you figure out the task. So, on the Internet you can easily find step by step instructions for making a portrait in pop art style. You can quickly draw on a computer, but if quality is not important to you, then try creating a portrait using stencils. There are several ways to make paintings in this style. I will tell you about the technology that an art artist uses.

Make a pop art portrait online – choosing a canvas

Having set yourself the task of learning how to create paintings in the current pop art style from photographs, get ready for the fact that you will not get a brilliant result right away. You'll have to suffer. To work you will need a primed fine-grained canvas on a stretcher. The choice of canvas format is at your discretion, but the most suitable formats for making a portrait are: 30x40 cm, 40x50 cm, 50x60 cm, 60x80 cm. To create it yourself, I recommend buying ready canvas on a stretcher. This will give you the opportunity to enjoy creative process, and not suffer with technical issues. In addition, without experience, you are unlikely to be able to prepare the canvas on your own in the way required by the work of a novice artist.

Watch the video on how to draw a woman's portrait pop art

How to quickly draw a Pop art portrait – choosing and applying colors

We will paint with acrylic spray paints. Pop art style, perhaps best example minimalism in fine arts. To create it with your own hands, 3 tones are enough: light, partial shade and shadow. You should start with the penumbra, which will be the main background of the image. This color should be the brightest to create a general color scheme canvases. The entire canvas should be covered with paint and left for 10-15 minutes to allow the paint to dry. Then the first stencil is applied - light, it is painted over by itself light paint. The paint canister should be held perpendicular to the tablet, at a distance of 20-30 cm, after which you should proceed to applying shadow and completing the work. You need to be especially careful when installing the shadow stencil, because it is superimposed on the drawn light. The result of the work depends on how evenly you lay the shadow stencil. After 24 hours, the pop art portrait can be hung on the wall.

Watch the video on how to draw a male portrait pop art

The pop art processing style does not lose its popularity. It is used for advertising posters, in magazine design and simply in social networks, as attractive avatars and propaganda banners.

In this article we will show you how to make art in Photoshop. More precisely, we will make an art picture from the photo. And undoubtedly best program to create art from photographs - this is Photoshop. There are several ways to create art. We will consider the least labor-intensive and fastest.

For work we need a portrait. Open the image in Photoshop. Duplicate the image layer ( Ctrl+J).

The background in the image needs to be removed. We wrote earlier in the article how to separate an object from the background.

If you have a uniform background in your photo, use the tool "Magic Wand Tool" or . If the background is complex, then you need a tool Quick mask mode.

In our case, we can separate the girl from the background using the tool Quick selection tool. We work with a duplicate image.

Select the background without affecting the model. After that, invert the selection ( Ctrl+I). Now it is not the background that is selected, but the object on the background, in our case the girl.

After this, just press the key combination Ctrl+C, Ctrl+V, so that the image of the girl separated from the background is transferred to a transparent layer.

Now we need to select in "Filter Gallery" one with which you can trace the contours of our black and white photo and posterize the shadows and highlights. Posterization will break the shades into levels, the transition between which will be very sharp. At this stage of creating art, you should choose your own filter for each photo, or even two, if necessary. The following filters are most likely suitable: “Strokes”/Brush Strokes/“Stroke”/Ink Outlines And "Accented Edges"; "Sketch"/"Photocopy"; . The filter gallery is located at "Filter" main menu of the program. Important! When choosing a filter, the main working colors should be black and white.

In our case, the filter was ideal “Imitation”/Artistic/“Outlined Edges”/Poster Edges. The filter is customizable. On the left side of the dialog box, you need to move the sliders until you achieve the desired result. "Edge thickness" we ask 1 , "Intensity"/Edge Intensity - 0 , "Posterization" - 1 . Notice how the lights and shadows are divided into levels. When you have finished selecting the parameters, click Ok.

All that remains is to color the image. An adjustment layer will help us with this. "Gradient Map". You can call it in the list of adjustment layers, at the bottom of the layers palette.

A dialog box will open. Double-click on the gradient to bring up the settings.

In them we have to specify four color points for the gradient. We will move from left to right.

Even more about Photoshop - in the courses.

There are sliders at the bottom of the gradient. They are control points (stops). On the left is a point - on Positions/Location 0%, on the right - 100%. With one click of the mouse below, under the gradient, you can create a new point. Once you grab it, you can move it left and right. Extra points can be deleted by highlighting and clicking on “Delete”/Delete. We have to put points at positions 25%, 50%, 75%. Let's assign a color to each point. The last two dots will be the same color, approximately similar to a person's skin tone.

You can set the color at a control point by double-clicking on it (on the slider). The palette will open. On the gradient of all colors, move the slider to the desired color and select the appropriate tone in the large hue gradient window. We close the window.

And now the points one by one.

With the addition of each new point shadow levels will be colored.

Set the point at the 25% position and set the color to red.

The next point will be blue color, position 50%.

Penultimate point 75%. We select its color close to the color of the skin. At the bottom there is a box with a note # . Copy the color code from this window (select and click Ctrl+C).

We already have the very last point. Position 100%. Double-click on it, open the palette, in the window marked # select the inscription and paste our copied code by clicking Ctrl+V. We close the window. We also close the gradient map by clicking Ok.

The gradient map adjustment layer needs to be attached to the girl's layer since we will be painting the background. To lock an adjustment layer, move your mouse between it and the one you applied it to. While holding Alt, click between the adjustment layer and the image layer. The adjustment layer will have an arrow indicating it will attach to the layer below.

Create a new layer ( Shift+Ctrl+N) and drag it under the layer with the girl’s image.

Staying on the new layer, take the tool Rectangular Marquee Tool.

Place the cursor in the upper left corner of the image and, holding down the left mouse button, drag it down; on the right, stick to the middle of the image. An area outlined with a dotted line will appear. Then select the tool "Fill"(key G). The color can be selected by double-clicking on the primary color swatches, which is located at the very bottom of the toolbar.

This Photoshop tutorial will introduce you to very well-known destination in fine arts like Pop Art.

Next to pop art is the name of Andy Warhol, who was an artist, a photographer, a film director, and a publisher.

It was he who, in the mid-20th century, created unique collage paintings from completely unexpected things - from images of cans to such glamorous collages with Elvis Presley and Marilyn Monroe.

This style became incredibly popular at the time, resulting in countless imitations of this artist's work.

Because creating pictures in the Pop Art style is very simple, especially if you know Photoshop.

The technique we want to tell you about is that first a black and white stencil is made based on the original drawing. And then parts of this drawing are painted in very bright colors in different variations.

Any portrait can be turned into a pop art drawing, but a photo with clear boundaries is especially suitable for this.

It is advisable that the person in the photo looks directly into the camera lens.

1. Below is the process of cutting out a boy from his original background and placing him on a new one. It is important for us that the boy and the background are placed on different layers.

To quickly remove a monochromatic background, use the magic wand tool, if the background is multi-colored, then take the Pen tool

2. Most likely, you have already noticed that pop art images are famous for their very high contrast.

The following steps will remove a lot small parts, so you don't have to be too careful as you work.

Place the bright background layer directly below the working layer (with the boy).

3. To make a high-contrast image, first make sure you are on the cutout boy layer and select Image > Adjustment > Threshold.

Adjust the slider so that the image contains enough shadows that all the main shapes and features are preserved.

4. Roughly select each part of the image that you will color later.

Press Alt + Ctrl + J to copy each part to separate layer. Give each new layer a name. Change the blending mode of each layer to Multiply, and click OK.

5. Activate each layer in the Layers palette one by one.
For each, press Ctrl + click on the layer window and go to the menu Edit> Fill.

Click on the Use line, a window will appear where you can select the Color line. Thanks to this, a color palette will appear, where you can choose a bright, saturated color to your taste to paint over any part of the image.

6. In the “Layer Style” window (Layer Style, appears if you double-click on the layer), select the Color Overlay style (color fill) and change the blending mode there to Color. Select a bright color and click OK.

7. When you repeat these steps for each separate area images, you will see that this is a real masterpiece in the pop art style.

8. Save this file in Photoshop format (.psd) and make copies of the layers where you did the coloring. In your layers panel, each area is painted a certain color. Now you can very easily change the color of the area using the Hue/Saturation function (Ctrl + U).

In the end, you can combine all the options into one large image.

This combination various options of the same image is very typical of the style of 60s Pop Art.

How to learn to draw pop-art paintings from photographs. How and in what program to make a stencil, how to print it correctly, what colors to choose, how to cut out the stencil correctly and in what order?

There are several ways to make a Pop-Art painting, we will tell you about the traditional American technology in which Andy Warhol worked and which the Portret-Art workshop uses

Canvas preparation and format

To start making a portrait, you will need a fine-grained canvas on a stretcher. (format 30x40 in the photo)
We recommend using already primed canvases stretched on a stretcher, which can be purchased at any art store. You don’t need to do this work yourself, you will have to buy a lot of materials (stretcher, canvas, white primer, roller), and besides, the first time you definitely won’t do it as neatly as required for a pop art painting. The next step is to select the canvas format, modern views art does not oblige the artist to use formats with the golden ratio. The most suitable formats for making a portrait: 30x40 40x50 50x60 60x80.

Purchase stretched canvas, will not only save you time, but will also allow you to enjoy only the creative part of this interesting process, painting a Pop-ART painting from a photograph.

choice of portrait colors (background)

For Choosing acrylic aerosol paints is an equally important step. We use Italian paints MTN94. It should be remembered that pop art style is an excellent example of minimalism in art, surprising people with its brightness and simplicity. That is why we need only 3 tones: light, penumbra and shadow. (which we have already divided our portrait into at the sketching stage) Now the question remains: what color should we start with? We start with the penumbra, which is the main background of the picture. This color should be the brightest of the 3 main ones, as it will create the overall color scheme. To do this, we cover the entire canvas with paint, not forgetting about the ends and not leaving white gaps, but also do not apply the layer too thick, because then we may encounter difficulties in subsequent stages. Leave the painting for 10-15 minutes, the paint should be well dry.

We pay special attention to the accuracy of laying out the background and penumbra.

apply a stencil

To make a portrait we need two stencils. Namely light and shadow. The penumbra is already laid out as a background and cutting out another stencil makes no sense. On the printed stencil, we have 3 colors: white, gray and black. This will prevent us from making mistakes. Because they will match our colors in the picture. First of all we have to cut out the white (light) then the shadow (black)

Before we start applying the light, we need to return to our canvas and tape the ends of the picture. For this we use a paint scorch, the width of which is 20mm. This is necessary so that when applying paint, we do not go beyond the edges, which will greatly affect the visual perception finished work. Now we can start installing the stencil using weights different sizes and forms, because we will have to install them on top of the smallest areas of paper, distributing them evenly throughout the stencil.

Let's move to the light

At this stage, we begin to paint the cut out areas of the stencil with white. The paint canister should be held perpendicular to the tablet, at a distance of 20-30 cm. If you reduce this distance, you can get a very thick layer of aerosol, and if you hold the canister at an angle, paint will spray beyond the boundaries of the cut out stencil, and as a result, unevenness in the picture and spraying under the stencil or paint spreading, which is unacceptable when using aerosol acrylic paints. The same consequences can occur if you do not place the weights well on top of the stencil. Therefore, try to complete all the steps indicated in the previous paragraph. There is no need to use caps with a wide spray pattern; these are more suitable for the background. More careful work is needed here.

Watch the tilt of your balloon and the distance to the tablet, the weights on the stencil, and don’t forget to shake the balloon periodically, not forgetting that we are painting with aerosol paints.

LET'S GO TO THE DRAWING AND COMPLETION OF THE PICTURE

At this stage we are laying out the shadow. We do not recommend using black for it. Dark gray or brown is best. Now you will have to tinker a little with installing the stencil, because now we are not placing it on a blank canvas, but on an already drawn light, and we need to make sure that the light on the canvas lies exactly on the light on the stencil, and only then start placing weights on top of the stencil. Next, we simply carry out all the points from the previous point. You also need to remove the stencil carefully and only on one side, so that the dark paint does not get on the light areas of the canvas. At the end of the work, the tape with which we glued the ends is removed, and after 24 hours the picture can be hung on the wall. Just enough is required for the paint to dry so much that the smell of aerosol paints disappears.

The final result depends on how evenly you can place the stencil on the already drawn light.